Table edgebanding machine STILER EB120 PRO + 1kg glue

STILER EB120 PRO STATIONARY VOELING MACHINE The latest model of stationary table top veneer machine by STILER. It is ideal for veneering table tops up to 60 mm high and automatic milling of table tops up to 45 mm high. The veneer machine is equipped with automatic glue application on the table top and veneer. In addition, the machine includes two milling machines for milling the top and bottom edges of the countertop. The machine also has a pneumatic veneer cutter (a compressor must be connected to power it). Obbing machines are equipped with a main switch and protection against restarting the machine in the event of power failure and return.Obbing machine is equipped with an automatic positioning of the processed table top, and extraction of the milled veneer Technical data: Total power demand: 3.2 kW Power supply: 230V Wrapping height: 7 - 60 mm Milling height: 7 - 45 mm Strap thickness: 0.3 - 3 mm Heat speed: 5 - 10 minutes Wrapping speed: 0-6 m/min Gluing tank capacity: 1000 ml Milling mandrel: 1/4" Work surface height: 780 mm Dimensions: 1900 x 510 x 1170 mm Weight: 80 kg Included: Complete machine 2 cutters with bearing 1 kg of glue Edge milling machines mill both the top and bottom edges of the tabletop. The set includes 2 cutters with bearings The machine also has an option to polish the milled edge. The speed of the polishing machine is regulated by a potentiometer. NEW: Machine equipped with the RECEIVER of the milled veneer. The machine is equipped with automatic retrieval of the veneer and automatic cutting it to the appropriate length of the tabletop. The veneer retrieval rollers engage when the glue reaches the appropriate temperature. The glue tank is located at the rear of the head. The veneer machine has a rotating head. The control panel includes: main switch milling machine switch polishing machine switch free speed adjustment of top peeling electronic glue temperature indicator free speed adjustment of veneer feeding The veneer machine has a pneumatic veneer cutter and a pneumatic lower milling press, an 8 BAR compressor is required to operate these instruments. The cutter is switched on by a foot switch and a limit switch when feeding the tabletop. The pressure rollers help to guide the tabletop evenly and prevent the tabletop from reversing. The rollers are height-adjustable. The worktable also has an auto-feed of the processed material. The feed speed is adjustable by a potentiometer on the control panel. A great convenience is an additional arm for veneer. The disc is mounted on the bearing. The work surface has support rollers for easier movement of the material while working. The support rollers have an option to extend which allows you to veneer larger dimensions. View movies