STILER BX 42R disc chipper with integrated hydraulics

Disc chipper STILER BX42R is used for shredding branches, tree trunks with a diameter of up to 10cm, while with offshoots up to 25cm. The newer reinforced model. 4 knives sharpened on both sides provide very high performance and life of the machine. The blades are made of hard tool steel. The machine has 1 counter blade. EQUIPED WITH NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS. GRATISE: POWER RECEIVER SHAFT AND 30CM EXHAUST LEAK extension. There is a HYDRAULIC SYSTEM built into the chopper - a pump and an oil reservoir. The back of the blade is equipped with breakers and ejection shovels for more efficient ejection of woodchips from the machine The machine has two hydraulic feeding rollers. They speed up the work and make it easier to feed the branches onto the disc. In addition, the machine has 10 feeding speeds and a reverse gear for withdrawing the branch. Rotations are transmitted through the power take-off by which we connect the machine directly to the shaft of the tractor. The minimum required shaft speed is 540 rpm. The machine is equipped with a three-point linkage system for the three-point linkage. The 360° rotary ejection of the woodchip allows us to direct the stream in any direction. Specifications: The material collection system is built with two gear shafts driven hydraulically. The material pick-up mechanism has a 10-stage pick-up speed regulator and a material dispensing function. The drive of the hydraulic system comes from a built-in hydraulic pump. The chipper has a massive disc with a diameter of 610 mm and a thickness of 18 mm. There are 4 double-sided sharpened cutting knives on the disc, measuring 210 mm x 60 mm. Additionally, a counter-knife is mounted on the shield of the disc. The design of the rotor allows for long-term operation without loading the tractor. All bearings, protected against the entry of dust, logging, etc., are lubricated through easily accessible calamites. On the disc there are also breakers (shovels) that shred the obtained logging to a value of 20-50 mm. The chipper with a three-point linkage (TUZ) is designed for cooperation with an agricultural tractor with a power of at least 18 km. The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut if the machine is overloaded and disconnects our direct drive. The chipper is additionally equipped with disc ventilation. In the set you also get a PTO power take-off shaft and an ejection extension hopper. The chipped wood is ejected through a pipe that is rotated 360° with respect to the chipper base. The chipped wood has dimensions ranging from 20mm to 60mm. Specifications Model: BX42R Size of chipped material: 10cm diameter (maximum 25cm with offshoots) Drive system: Drive from tractor engine transmitted through PTO Minimum tractor power: 18 hp Turner size: 63cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 43 kg Material feeding mechanism: Built-in pump and oil tank + 2 intake rollers Mounting system: Three-point linkage (three-point linkage) Dimensions (with feed hopper folded): 101cm D x 106cm S x 152cm W Feed hopper: 50 x 50cm Ejection tube rotation range: 360° Ejector tube height: Rating revolutions per minute/ Rated rpm: 540-1000 Chipper weight: 385 kg Review videos.