Disc chipper STILER BX62R is used for shredding branches, tree trunks with a diameter of up to 15cm, while with offshoots up to 30cm. The newer reinforced model. 4 knives sharpened on both sides provide very high performance and life of the machine. The blades are made of hard tool steel. The machine has 1 counter-blade. The back of the blade is equipped with breakers and ejection blades for more efficient ejection of woodchips from the machine EQUIPED WITH NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!! GRATIS: power take-off shaft and 30CM extension of the spout hopper. There is a HYDRAULIC SYSTEM built into the rake - a pump and an oil tank. The machine has two hydraulic feed rollers. They speed up the work and make it easier to feed the branches to the disc. In addition, the machine has 10 feeding speeds and a reverse gear for withdrawing the branches. Rotations are transmitted through the power take-off by which we connect the machine directly to the shaft of the tractor. The minimum required speed of the shaft is 540 rpm. The machine is equipped with a three-point linkage system of the TUZ. The 360° rotary ejection of the woodchip allows us to direct the stream in any direction. Specifications: The material collection system is built with two gear shafts driven hydraulically. The material intake mechanism has a 10-stage intake speed regulator and a material dispensing function. The drive of the hydraulic system comes from a built-in hydraulic pump. The chipper has a massive disc with a diameter of 740 mm and a thickness of 25 mm. There are 4 double-sided sharpened cutting knives on the disc with dimensions of 240 mm x 60 mm. Additionally, a counter-knife is mounted on the shield of the disc. The design of the rotor allows for long-term operation without loading the tractor. All bearings protected against the entry of dust, logging, etc. are lubricated through easily accessible calamites. On the disc there are also breakers (shovels) that shred the obtained logging to a value of 20-50 mm. The chipper with a three-point linkage (TUZ) is designed for cooperation with an agricultural tractor with a power of at least 30 km. The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut if the machine is overloaded and disconnects our direct drive. The chipper is additionally equipped with blade ventilation. In the set you also get a PTO power take-off shaft and an ejection extension hopper The chipped wood is ejected through a pipe rotated by 360° with respect to the base of the chipper. The chipped wood has dimensions ranging from 20mm to 60mm. Specifications Model: BX62R Size of chipped material: 15cm in diameter (maximum 30cm with regrowth) Drive system: Drive from tractor engine transmitted through PTO Minimum tractor power: 30 hp Turner size: 76 cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 79 kg Material feeding mechanism: Built-in hydraulic system - 2 gear shafts Fixing system: Three-point linkage (three-point linkage) Dimensions (with batch hopper folded): 127 cm D x 132 cm S x 188 cm W Batch hopper: 63 x 63 cm Range of ejection tube rotation: 360° Ejection tube height: 188cm Rating revolutions per minute/Rating revolutions: 540-1000 Chipper weight: 510 kg Review videos.