Original STILER MIT 300 belt cutter NEW POWERFUL MODEL. PROFESSIONAL, VERY POWERFUL AND EFFICIENT Widely used in locksmith, manufacturing, craftsmen's shops. The new model uses a more powerful three-phase motor with additional safety features, a new generation maintenance-free hydraulic cylinder, liquid cooling in a closed system with a large drain pan. Machines are manufactured in Ukraine. Its precision and robustness puts it at the forefront of band saws with the ability to cut at any angle up to 60º. Additionally, the guides have been equipped with carbide, which translates into greater accuracy in serial cuts. Main advantages of the machine are: a rotary arm up to 60º, a new generation hydraulic cylinder, a more powerful 1.5 kW 400V motor, a more efficient cooling system. The machine is equipped with a sliding vise with quick clamping which makes the replacement of the cut workpiece really efficient. Bearing guides provide secure and even guidance of the tape in the cut material. In addition, at the bearings are mounted, carbide which improves accuracy in serial cuts. A big plus is the cooling of the cutting belt located directly on the guide. Hydraulic cylinder with infinitely adjustable arm drop, makes it easier to set the speed more accurately to the material to be cut. The machine is equipped with a powerful cooling pump (CE) with a large reservoir, and a comfortable handle for belt tension. Limit switches turn off the machine after the work cycle is completed. Also, they prevent the machine from starting when changing the belt when the guard is raised. The arm drop speed can be easily adjusted on the control panel. The machine is equipped with a belt cleaning brush, which translates into blade life and cutting quality. The convenient belt tension handle is additionally equipped with a belt break sensor, which stops the machine. Specification: Machine entirely produced in Ukraine "REAL GNIOTSA NOT LAMBLE !" Massive, stable and refined construction and arm made of massive welded steel sheets provides the machine with very high rigidity and stability when cutting, which ensures precision cutting and long trouble-free operation. The construction as well as the use of a 27 mm wide cutting belt, makes it fully possible to perform multi-series cutting of both profiles and full details. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guiding, its service life, straightness, accuracy and quality of cutting. The MIT Belt Cutter is equipped with a modern material clamping system with quick locking. The cutting speed is adjusted by a hydraulic cylinder. The machine is equipped with a powerful cooling pump (CE) with a large tank, and a comfortable handle for belt tension. The feed speed is adjusted on the control panel of the cutter. There is a choice of three cutting belt speeds of 30, 50 and 70 m/min. In the lower position of the arm ( after the material has been cut), the cutting belt drive and cooling system is switched off automatically. Safety will be ensured by cutting belt guards and micro switches that stop engine operation when the cutting cycle is completed or when any of the guards are opened, an additional safety feature is the automatic shutdown of the cutting machine in case the cutting belt breaks. The motor is equipped with new generation thermal fuses. The base is built as a rigid body welded from steel sheets. Inside is a separate coolant reservoir with an electric pump and a large drainage basin. The design of the upper part of the base provides a basin for draining coolant and catching chips generated during material cutting. A STEEL work table with a rotating arm and a control panel on a separate pedestal is attached to the base. In the cutting process, the main cutting motion is the movement of the cutting belt and the feed of the arm descent. The speed of the arm descent (cutting speed) is regulated by a hydraulic actuator. The drive from the motor to the belt drive wheel is transferred by a maintenance-free worm and belt transmission. Technical data Model: MIT300 Power: 1.5 kW Power supply: 400V, 3 phase Cutting belt size: 3350x27x0.9 mm Arm drop adjustment: Hydraulic cylinder Belt linear speed: 30/50/70 m/min Weight: 480 kg Cutting range Angle Tube PROFILE CADRAT 0º ø300 400 x 240. 240 x 240 45º ø220 280 x 220 220 x 220 55° ø180 220 x 180 180 x 180.