Reliable disc chipper We present to you our most popular, reliable, VERY powerful disc chipper STILER BX 42S. The new model has a thicker disc which translates into greater strength and shredding power. The chipper is equipped with a flap that stops the material while pulling it in. Thanks to simple technology, the system is reliable and trouble-free. If you need to use the system, just push the red safety lever. 4 knives sharpened on both sides provide very high performance and machine life. The blades are made of hard tool steel. The machine has 1 counter blade. The rear of the blade is equipped with breakers and ejection blades for more efficient ejection of woodchips from the machine. Rotations are transmitted through the power take-off by which we connect the machine directly to the shaft of the tractor. The minimum required shaft speed is 540 rpm. The machine is equipped with a three-point linkage system The 360° rotary ejection of the woodchips allows us to direct the stream in any direction. The chipper has the ability to hook up a small trailer. Machine specifications: The Stiler BX42 Chipper is used for chipping branches, tree trunks with a diameter of up to 10cm, while with offshoots up to 25cm. The chipper with a three-point suspension system (TUZ) is designed to work with an agricultural tractor with a power of at least 18 HP. The drive is transmitted through the power take-off shaft of the tractor. The generated woodchip is ejected through a pipe rotated by 360° in relation to the base of the chipper. Massive disc equipped with 4 knives sharpened on both sides + one counter-knife. Additionally, our disc is re-equipped with breakers (shovels) that further grind the obtained woodchip to the value of 20-60 mm. The chipper is additionally equipped with ventilation of the disc. For transport, the hopper can be folded down. All bearings are protected against the entry of dust, woodchipping, etc. All hitches, pins, etc. are included - you buy a machine ready to work ! The design of the rotor allows for long-term operation without loading the tractor. In addition, a special power take-off shaft, adjustable feet, ball hitch are optional. Technical data Model: BX42 Size of shredded material: 10cm diameter (maximum 25cm with offshoots) Drive system: Drive from tractor engine transmitted through PTO Minimum tractor power: 18 hp Turner size: 63cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 43 kg Material feeding mechanism: Manual operation Fixing system: Three-point linkage system (three-point linkage) Dimensions (with feed hopper folded): 101cm D x 106cm S x 152cm W Feed hopper: 50 x 50cm Ejection tube rotation range: 360° Ejection tube height: Rating revolutions per minute/ Rated rpm: 540-1000 Chipper weight: 230 kg Review videos.