Splitter for tractor 20 TON The STILER 20T splitter is used for splitting tree trunks with a diameter of up to 50cm and a length of up to 60cm. The high power of the machine provides comfortable work even with the hardest types of trees. The splitter with a three-point linkage is designed to work with an agricultural tractor. The drive is transmitted by the tractor's hydraulic pump. The piston control is carried out by a lever located on the PULPIT of the splitter. This lever has three position states: Forward, neutral and reverse. Letting go of the lever will automatically put the machine into neutral mode which will cause the piston to stop in place. The splitter is equipped with a three-point suspension system, which allows it to be hitched to an agricultural tractor under the TUZ. The machine is driven by a tractor pump. The cables are equipped with quick connectors so that the connection and disconnection of the machine is extremely fast and efficient. The splitter can operate in two positions: horizontal and vertical. Technical data Pressure force 20 tons The operation of the splitter Level/vertical Max. Log length 600 mm Diameter of log 500 mm Diameter of piston 100 mm Minimum recommended hydraulic fluid flow 49 l/min Full cycle Ok.