STILER BX 42R disc chipper

Disc chipper STILER BX42R is used for shredding branches, tree trunks with a diameter of up to 10cm, while with offshoots up to 25cm. The newer reinforced model. 4 knives sharpened on both sides provide very high performance and life of the machine. The blades are made of hard tool steel. The machine has 1 counter-blade. EQUIPED WITH NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!! The back of the blade has been equipped with breakers and ejection blades for more efficient ejection of woodchips from the machine The machine has two hydraulic feeding rollers. They speed up the work and make it easier to feed the branches onto the disc. In addition, the machine has 10 feeding speeds and a reverse gear for withdrawing the branch. Rotations are transmitted through the power take-off by which we connect the machine directly to the shaft of the tractor. The minimum required shaft speed is 540 rpm. The machine is equipped with a three-point linkage system for the three-point linkage. The 360° rotary ejection of the woodchip allows us to direct the stream in any direction. Specifications: The material collection system is built with two gear shafts driven hydraulically. Mechanism taking the material has a 10-stage regulator of the speed of taking and the function of issuing the material. The drive of the hydraulic system comes from the outputs of the tractor's hydraulics (fast coupling attachment) The chipper has a massive disc with a diameter of 610 mm and a thickness of 18 mm. On the disc there are 4 cutting knives sharpened on both sides with dimensions of 210 mm x 60 mm. Additionally, a counter-knife is mounted on the shield of the disc. The design of the rotor allows for long-term operation without loading the tractor. All bearings, protected against the entry of dust, logging, etc., are lubricated through easily accessible calamites. On the disc there are also breakers (shovels) that shred the obtained logging to a value of 20-50 mm. The chipper with a three-point linkage (TUZ) is designed for cooperation with an agricultural tractor with a power of at least 18 km. The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut if the machine is overloaded and disconnects our direct drive. The chipper is additionally equipped with blade ventilation. In the set you also get a PTO power take-off shaft The chipped wood is ejected through a pipe rotated by 360° with respect to the base of the chipper. The chipped wood has dimensions from 20mm to 60mm. Specifications Model: BX42R Size of chipped material: 10cm diameter (maximum 25cm with offshoots) Drive system: Drive from tractor engine transmitted through PTO Minimum tractor power: 18 hp Turner size: 63cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 43 kg Material feeding mechanism: Tractor hydraulic drive - 2 intake shafts Mounting system: Three-point linkage system (three-point linkage) Dimensions (with feed hopper folded): 101cm D x 106cm S x 152cm W Feed hopper: 50 x 50cm Ejection tube rotation range: 360° Ejector tube height: Rating revolutions per minute/ Rated rpm: 540-1000 Chipper weight: 340 kg Review videos.