Band saw STILER BS 170G 230V + TENSOMETER

Original belt cutting machine STILER BS 170G Additionally, the machine is equipped with a dial tensometer, which greatly facilitates the correct tension of the cutting belt. NEW POWERFUL MODEL. PROFESSIONAL, VERY POWERFUL AND EFFICIENT Widely used in locksmith, manufacturing, handicraft shops. The new model features a more powerful motor with additional safety features, a new generation maintenance-free hydraulic cylinder, closed system liquid cooling with a large drain pan. Main advantages of the machine are: rotating arm up to 60º, new generation hydraulic cylinder, more powerful 1.1kW motor, more efficient cooling system. The new more powerful 1.1kW motor and transmission ensure high machine power and trouble-free operation and maintenance. The machine is equipped with a tension spring and quick vise clamping. Bearing guides ensure secure and even guidance of the belt in the material being cut. A big plus is the cooling of the cutting belt located directly on the guide. Included is a bumper for the length of the material being cut. Hydraulic cylinder with infinitely adjustable arm drop, makes it easier to set the speed more accurately to the material being processed. Limit switches prevent accidental activation of the machine when changing the saw. And also turn off the machine after each completed cycle of operation. The cooling system used extends the durability of the cutting belt when cutting thick materials.Machine characteristics: Massive, stable and refined structure and arm made of uniform cast iron provides the machine with very high rigidity and stability when cutting, resulting in precise cutting and long trouble-free operation. The design, as well as the use of a 20 mm wide cutting belt, makes it fully possible to carry out multi-batch cutting of both profiles and solid workpieces. In the cutting process, the main cutting motion is the movement of the cutting belt and the feed of the descending arm. The arm descent rate (cutting speed) is regulated by a hydraulic cylinder. The drive from the motor to the belt drive wheel is transferred by a maintenance-free worm gear. The machine has two gears, which are responsible for the belt speed. 32 and 72 m/min. Included is a bumper for the material being cut, an EN instruction manual and a set of tools. The feed rate is adjusted on the control panel of the cutting machine. In the lower position of the arm ( after the material has been cut), the cutting belt drive and cooling system is automatically switched off. Safety will be ensured by cutting belt guards and micro switches that stop engine operation when the cutting cycle is completed or when any of the guards are opened, an additional safety feature is the automatic shutdown of the cutter in the event of a breakage of the cutting belt. The motor is equipped with new generation thermal fuses. The base is built as a rigid body welded from steel sheets. Inside there is a separate coolant tank with an electric pump and a large drainage basin. The design of the upper part of the base provides a basin for draining coolant and catching chips generated during material cutting. A cast-iron work table with a rotating arm and a control panel on a separate pedestal is attached to the base. Technical data Model: BS 170G Power: 1.1 kW Power supply: 230V, 1 phase Cutting belt size: 2085x20x0.9 mm Arm drop adjustment: Hydraulic cylinder Belt speed: 40 m/min. Distance of the vise base from the ground 890 mm Dimensions: 1060x600x1430 mm Weight: 200 kg Cutting range Angle TUBE PROFILE CADRAT 0º ø170 210 x 170 170 x 170 45º ø120 120 x 110 110 x 110 60° ø70 70x60 60x60.