STILER BX 92 disc chipper

The STILER BX92 chipper is used for shredding branches and tree trunks with a diameter of up to 25cm. The chipper with a three-point suspension system is designed to work with an agricultural tractor with a power of at least 30 km. Disc chippers, unlike drum chippers, do not load and damage the engine in the tractor and do not cause faster wear of the clutch. The cutting disc overcomes the resistance to cutting by inertia - the weight of the cutting disc alone is 110 kg. The drive is transmitted from the tractor through the PTO shaft, which is equipped with a safety pin, which is cut if the machine is overloaded and disconnects our direct drive. The produced woodchip is ejected through a pipe rotated by 360° in relation to the base of the chipper. Massive disc equipped with 4 knives sharpened on both sides + one counter-knife. Additionally, our disc is equipped with shredders (shovels) shredding the additionally obtained chipping to the value of 20-50 mm. The chipper is additionally equipped with ventilation of the disc. All bearings protected against the entry of dust, chipping, etc. are lubricated through easily accessible calamites. All hooks, pins, etc. are included - you buy a machine prepared to work with a Polish clear instruction manual and ce certificate! As an additional option - a wom shaft with overload protection Technical data Model: BX92 Size of shredded material: 25cm in diameter (maximum 30cm with offshoots) Drive system: Drive from tractor engine transmitted via PTO Minimum tractor horsepower: 50 hp Turner size: 94 cm Number of cutting knives: 4 + 1 Counter-blade Knife type: Hardened CR12 tool steel Turner weight: 110 kg Mechanism of material feeding: Manually operated Mounting system: Three-point linkage system (TUZ) Dimensions (with hopper folded down): 167 cm D x 173 cm S x 228 cm W Batch hopper: 63 x 63 cm Range of ejection tube rotation: 360° Ejection tube height: 228cm Rating revolutions per minute/Rating revolutions: 540-1000 Chipper weight: 530 kg View videos.