Disc chipper STILER BX92R is used for shredding branches, tree trunks with a diameter of up to 25 cm, while with offshoots up to 30 cm. New reinforced model. EQUIPED WITH NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE SHARERS !!! Massive disc and 4 knives sharpened on both sides guarantee the machine a long life and very high efficiency in shredding the material (up to 25 cm). The back of the disc has been equipped with breakers and ejection blades for more efficient ejection of chips from the machine The machine has two hydraulic feeding rollers. They speed up the work and make it easier to feed the branches onto the disc. In addition, the machine has 10 feeding speeds and a reverse gear for withdrawing the branch. Rotations are transmitted through the power take-off by which we connect the machine directly to the shaft of the tractor. The minimum required shaft speed is 540 rpm. The machine is equipped with a three-point linkage system for the three-point linkage. The 360° rotary ejection of the woodchip allows us to direct the stream in any direction. Specifications: The material collection system is built with two gear shafts driven hydraulically. The material pick-up mechanism has a 10-stage pick-up speed regulator and a material dispensing function. The drive of the hydraulic system comes from the tractor's hydraulic outputs (quick coupling attachment) The chipper has a massive disc with a diameter of 940 mm and a thickness of 35 mm. On the disc there are 4 cutting knives sharpened on both sides with dimensions of 318 mm x 100 mm. Additionally, a counter-knife is mounted on the shield of the disc. The design of the rotor allows for long-term operation without loading the tractor. All the bearings, which are protected against the entry of dust, logging, etc., are lubricated through easily accessible calamites. On the disc there are also breakers (shovels) that shred the obtained logging to a value of 20-60 mm. The chipper with a three-point linkage (TUZ) is designed for cooperation with an agricultural tractor with a power of at least 50 km. The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut if the machine is overloaded and disconnects our direct drive. The chipper is additionally equipped with blade ventilation. In the set you also get a PTO power take-off shaft The chipped wood is ejected through a pipe rotated by 360° with respect to the base of the chipper. The chipped wood has dimensions from 20mm to 60mm. Specifications Model: BX92R Size of chipped material: 25cm in diameter (maximum 30cm with regrowth) Drive system: Drive from tractor engine transmitted through PTO Minimum tractor power: 50 hp Turner size: 94 cm Number of cutting knives: 4 + 1 Counter blade Knife type: Hardened CR12 tool steel Turner weight: 110 kg Material feeding mechanism: Tractor hydraulic drive - 2 pinion shafts Fixing system: Three point linkage system (three-point linkage) Dimensions (with batch hopper folded): 167 cm D x 173 cm S x 228 cm W Batch hopper: 63 x 63 cm Range of ejection tube rotation: 360° Ejection tube height: 228cm Rating revolutions per minute/Rating revolutions: 540-1000 Chipper weight: 625 kg Review video.