STILER BX 102R disc chipper

The STILER BX 102R disc chipper is used for shredding branches, tree trunks with a diameter of up to 25 cm. With built-in HYDRAULIC SYSTEM (pump and HYDRAULIC OIL TANK). Newer reinforced model. EQUIPED WITH NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!! 4 knives sharpened on both sides provide very high efficiency and life of the machine. The blades are made of hard tool steel. The machine has 1 counter blade. The back of the blade is equipped with breakers and ejection shovels for more efficient ejection of woodchips from the machine The machine has two hydraulic intake rollers. They speed up the work and make it easier to feed the branches onto the disc. In addition, the machine has 10 feeding speeds and a reverse gear for withdrawing the branch. Rotations are transmitted through the power take-off shaft by which we connect the machine directly to the tractor shaft. The minimum required shaft speed is 540 rpm. The machine is equipped with a three-point linkage system. The 360° rotary ejection of woodchips allows us to direct the stream in any direction. GRATIS: PTO POWER RECEIVER SHAFT Specification: The material pick-up system is built with two shafts hydraulically driven from a built-in pump. The material pick-up mechanism has a 10-stage pick-up speed controller and a material dispensing function. The drive of the hydraulic system comes from the tractor's hydraulic outputs (quick coupling attachment) The chipper has a massive disc with a diameter of 940 cm There are 4 cutting knives sharpened on both sides on the disc. Additionally, a counter-knife is mounted on the shield of the disc. The design of the rotor allows for long-term operation without the load of the tractor. All bearings protected against the entry of dust, woodchip, etc. are lubricated through easily accessible calamites. On the disc there are also breakers (shovels) that shred the obtained woodchip to a value of 20-60 mm. The chipper with a three-point linkage (TUZ) is designed to work with an agricultural tractor with a power of at least 80 km. The drive from the tractor to the chipper is transmitted by means of a transmission shaft equipped with a safety pin, which is cut off if the machine is overloaded and disconnects our direct drive. The chipped wood is ejected through a pipe rotated by 360° with respect to the base of the chipper. Produced woodchip has dimensions from 20mm to 60mm Specifications Model: BX 102R Size of shredded material: 25 cm in diameter Drive system: Drive from tractor engine transmitted via PTO Minimum tractor horsepower: 80 hp Turner size: 940 cm Number of cutting knives: 4 + 1 Counter-rotor Knife type: Hardened CR12 tool steel Turner weight: 170 kg Material feeding mechanism: Built-in pump and reservoir, two intake rollers Fixing system: Three-point linkage (TUZ) Dimensions: 240 cm D x 130 cm S x 285 cm W Batch hopper: 92 x 85 cm Ejection tube swivel range: 360° Ejection tube height: 285 cm Rating rpm/ Rated speed: 540-1000 Chipper weight: 870 kg .