Disc chipper STILER FD - TH reliable, very powerful, equipped with rollers feeding the material onto the disc. DESIGNED FOR SMALL TRAINS (MINIMUM REQUIRED POWER IS ONLY 20 hp) The self-collection mechanism consists of 2 hydraulic rollers. The machine is designed to shred branches up to 16 cm in diameter(up to 30 cm with offshoots) The minimum required tractor power is 20 horsepower. The drive is transmitted through the PTO power take-off shaft (included in the set). Two hydraulically driven feeding shafts make it easy for the machine to shred spreading branches. The machine itself pulls the material onto the disc. The chipper is equipped with its own pump. The red lever is used to stop the hydraulic rollers in case of failure. Universality of the machine is also added by adjustable legs thanks to which the machine fits almost all tractors available on the market. The chipper is equipped with a 3-point suspension system (TUZ). That is, the standard found in all tractors available on the market. The chipped wood has a dimension of 20 - 30 mm. Characteristics: It uses high-quality blades, which can be replaced from the side of the machine by one person in just 10 minutes, thanks to easy access panels. The durability of our machines is evidenced by the use of solidly made steel sheet. The chipper is equipped with a pulling shaft with teeth made of high-carbon steel the advantage of this type of shaft is that it aggressively grabs any branch up to 16cm thick with or without leaves. The chipper has THREE heavy-duty bearings on which the main shaft is mounted, as well as reinforced, wide, driving V-belts. Adjustable legs allow the chipper to be connected to a wider range of tractors. This innovation makes it easier to achieve the recommended power take-off angle (less than 15 degrees) on larger tractors. The top handle is used to lift the feed roller which makes it easier for it to grab large diameters. Regulated speed of the feed rollers. The reverse gear allows us to reverse unwanted material. The red handle also serves as a safety switch. When it is pulled, the rollers stop feeding material The transparent vinyl baffle protects the user from scattered chips, allowing us to see what is happening in the hopper. The ejection hopper has an adjustable rotation of up to 360°. This allows you to direct the stream of chips in any direction without any problem. Specifications Model: FD-TH Size of shredded material: 16 cm in diameter (maximum 30 cm with regrowth) Drive system: Drive from the tractor engine transmitted through the PTO Minimum tractor power: 20 hp Rotor size: 660 mm Rotor thickness: 25 mm Rotor weight: 98 kg Number of cutting knives: 2 + 1 Counterblade Knife type: Hardened CR12 tool steel Material feeding mechanism: Two rollers powered by their own pump Fixing system: Three-point linkage system (three-point linkage) Dimensions: 140 cm D x 120 cm S x 182 cm W Batch hopper: 50 x 50cm Ejection tube swivel range: 360° Ejection tube height: 182cm Rating revolutions per minute/Rating revolutions: 540-720 Chipper weight: 480 kg Review videos.