Table edgebanding machine STILER EB120 + 1kg glue

STILER EB120 Stationary Veneer Machine The latest model of STILER's stationary countertop veneer machine. Ideally suitable for veneering countertops up to 60 mm high and automatic milling of countertops up to 45 mm high. The veneer machine is equipped with automatic glue application on the countertop and veneer. In addition, the machine includes two milling machines for milling the top and bottom edges of the countertop. The machine also has two pneumatic veneer cutters (a compressor must be connected to power them). Obbing machines are equipped with a main switch and protection against restarting the machine at the loss and return of power supply.Obbing machine HAS AUTO POSITIONING OF WORKED TOP Technical data: Total power demand: 3.2 kW Power supply: 230V Wrapping height: 7 - 60 mm Milling height: 7 - 45 mm Tape thickness: 0.3-3 mm Heat-up speed: 5 - 10 minutes Wrapping speed: 0-6 m/min Gluing tank capacity: 1000 ml Cutter stem: 1/4" Dimensions: 850 x 500 x 450 mm Weight: 80 kg Included: Complete machine 2 cutters with bearing 1 kg of glue The machine is equipped with automatic veneer retrieval and automatic cutting to the appropriate length of the tabletop. The rollers retrieving the veneer turn on when the glue reaches the appropriate temperature. On the control panel there is: main switch mill switch smooth adjustment of the speed of peeling the tabletop electronic glue temperature indicator smooth adjustment of the speed of feeding the veneer There are two pneumatic veneer cutters in the veneer machine for their power supply a compressor of about 8 BAR is required. The cutters are switched on by foot switches and a limit switch when feeding the tabletop. The pressure rollers set obliquely help to guide the tabletop evenly and prevent the tabletop from reversing. The rollers have adjustable pressure. The work surface also has an auto-feed of the processed material. The feed speed is regulated by a potentiometer on the control panel. The edge milling machine mills both the top and bottom edge of the tabletop. The set includes 2 milling cutters with bearings The machine also has the option of polishing the milled edge. A great convenience is the additional arm for veneer. The disc is mounted on a bearing. The machine also has the option of veneering tabletops of irregular shape. For such veneering it is necessary to move the glue feeding head to the lateral position. The veneer machine is equipped with a blower to clean the work field during milling. The work surface has slides and support rollers for easier movement of the material during operation. The support rollers have an option to extend which allows you to veneer larger sizes. Reproduction videos