Guillotine shears STILER PBS-9

STILER PBS9 guillotine shears. The STILER PBS9 guillotine shears are designed for manual cutting of sheet metal, sections and bars and also for punching holes. STILER PBS9 guillotine can be successfully used in locksmith shops or construction sites. Characteristics: Hand guillotine shears for cutting sheet metal, sections and bars of round and square cross-section. Cutting holes in sheet metal Stable design for effective cutting - does not require a lot of force Blade made of hardened tool steel Adjustable pressure Equipment made of steel plates. Cutting parameters: Round bar: 22 mm Square twist: 20 mm Blade: 90X14 mm Angle bar: 60X7 mm Tee bar: 60X7 mm Plate - thickness: 10 mm Punching diameter: 16 mm Thickness of punched sheet: 0.5 mm - 5 mm Maximum sheet length: 400 mm. Machine parameters: Blade length: 178 mm Weight: 158 Dimensions: 110 x 36 x 93 cm Parameters for punching in individual materials: Thickness: 0.5 - 1.5 mm: Aluminum: hole 3 - 22 mm Copper: bore 3 - 22 mm Carbon steel: bore 6 - 22 mm Thickness 1.5 - 2.5 mm: Aluminum: bore 3 - 22 mm Copper: bore 5 - 22 mm Carbon steel: bore 8 - 18 mm Thickness 2.5 - 3.5 mm: Aluminum: bore 5 - 22 mm Copper: bore 6 - 22 mm Carbon steel: bore 10 - 17 mm Thickness 3.5 - 5 mm: Aluminum: bore 8 - 22 mm Copper: 8 - 22 mm hole Carbon steel: X Specification: Universal blade made of strong tool steel for cutting round bars, square bars, angle bars, flat bars and sheet metal. Additionally, the machine has a function for punching holes in sheet metal up to 5 mm. The diameter of the punched hole is 16 mm. It is possible to mount other dies from 3 mm to 22 mm. A handy solution is the bumper of the punched sheet. Thanks to it we have the ability to accurately set the depth of punching. The machine has a convenient and functional pressure of the cut material so that it does not move under the blade. Double springs on both arms make the work light and accurate. The matrix has calamites for its lubrication, which translates into the life of the blade. The guillotine can easily cope with cutting sheet metal up to 10 mm. The guillotine has a convenient and functional pressure on the cut material, so it does not move under the blade.