Sheet metal bending machine STILER W 1,5 X 1520 Used for manual bending of sheet metal along a straight line at a specified angle. Massive construction ensures stable operation and failure-free machine. Indispensable, among others, in the production of rectangular ventilation ducts, chimney eaves roofs, fireplace ends and many others. Easy and quick to operate. Manually driven. Thanks to the use of a top beam divided into 13 removable segments, it is possible to customize the machine according to your needs. Very easy and light operation thanks to the built-in spring system that automatically lifts the top clamp when the lock is released and allows bending even with one hand. Segment widths: 25 mm - 1 pc 30 mm - 1 pc 35 mm - 1 pc 40 mm - 1 pc 45 mm - 1 pc 50 mm - 1 pc 75 mm -. 1 piece 100 mm - 1 piece 150 mm - 1 piece 200 mm - 1 piece 250 mm - 2 pieces 270 mm - 1 piece Technical parameters: Bending angle: 0° - 135° Maximum sheet width: 1520 mm Maximum sheet thickness: 1.5 mm Maximum opening: 46 mm Dimensions: 1930 mm x 680 mm x 1330 mm Weight: 390kg Thanks to removable segments, the machine can be easily (all you need is an Allen wrench) adapted to a specific bending specification. Such a solution allows us to bend sheet metal from 25 mm to 1520 mm wide. Easy and trouble-free system of lifting the upper beam and adjusting the die pressure. The limiting bumper facilitates serial bending at the same angle. The upper pressure is automatically raised when the lock is released (a system of springs is responsible for this). To lower the pressure just press the pedal so that the locking mechanism engages and does not allow the pedal to retract. The spring is also equipped with a bending element so that bending can be done even with one hand. Maximum bending angle is 135°