Table edgebanding machine STILER FX800 + 1kg glue

STILER FX800 STATIONARY VENGERATION MACHINE FILM OF WORK: https://www.youtube.com/watch?v=VCiuRWmJSiA&feature=emb_title The latest model of STILER stationary table top veneer machine. Ideally suitable for veneering table tops up to 60 mm high and automatic milling of table tops up to 45 mm high. The veneer machine is equipped with automatic glue application on the table top and veneer. In addition, the machine includes two milling machines for milling the top and bottom edges of the countertop. The machine also has two pneumatic veneer cutters (a compressor must be connected to power them). The veneer cutters are equipped with a main switch and protection against restarting the machine in case of power failure and return.BUILT INTRODUCED EXTRARAORDINATORS HAVE BEEN EQUIPPED WITH AUTO POSITIONING OF THE WORKED TOP Technical data: Total power demand: 3.2 kW Power supply: 230V Extraction: YES (built-in extraction system for milling residue) Diameter of extraction pipe: 50 mm Wrapping height: 7 - 60 mm Milling height: 7 - 45 mm Strap thickness: 0.3 - 3 mm Heating speed: 5 - 10 minutes Wrapping speed: 0-6 m/min Gluing tank capacity: 1000 ml Milling mandrel: 1/4" Work surface height: 760 mm Dimensions: 1800 x 600 x 1090 mm Weight: 126 kg Included: Complete machine 2 four-knife cutters with bearing Waste bag 1 kg of glue The machine is equipped with automatic veneer retrieval and automatic cutting to the appropriate length of the tabletop. The rollers retrieving the veneer turn on when the glue reaches the appropriate temperature. The control panel features main switch milling machine switch free speed control for peeling the countertop electronic glue temperature indicator free speed control for feeding veneer free speed control for polishing The edge milling machines mill both the top and bottom edges of the countertop. The set includes 2 four-cone cutters with bearings The machine also has an option to polish the milled edge. The speed of the polisher is regulated by a potentiometer. The machine is equipped with an extraction system in conjunction with a fan. The excavated material from both the upper and lower cutter is extracted and passed on to the pipe. The outlet pipe has a diameter of 50 mm, it can be connected to an additional vacuum cleaner or a bag (the bag is included in the set). In the edgebanding machine there are two pneumatic veneer cutters for their power supply requires a compressor with a capacity of about 8 BAR. The cutters are switched on by foot switches and a limit switch when feeding the table top. Pressing rollers set obliquely help to guide the tabletop evenly and prevent the tabletop from going backwards. The rollers have adjustable pressure. The work surface also has an auto-feed of the processed material. The feed speed is regulated by a potentiometer on the control panel. In contrast to the competition, in our model the belt taking the material has been extended all the way behind the glue application head. This makes the machine virtually maintenance-free. A great convenience is an additional arm for veneer. The disc is mounted on a bearing. The work surface has support rollers for easier movement of the material during operation. The support rollers have an extension option which allows you to veneer larger dimensions. After machining on the milling machines, the edges are polished from above and below. The glue tank has been placed in an easily accessible place, next to the head of the edgebander. The glue tank has been placed in an easily accessible place, next to the head of the edgebander.