Inverter semi-automatic welding machine FANMIG 212 LCD MOST

The FANMIG 212 LCD is a state-of-the-art inverter semi-automatic welding machine for MIG/MAG, TIG DC (friction ignition) or MMA shielded electrode welding. The device is synergistically controlled and has a large set of programs for welding steel, stainless steel and aluminum. In addition, there is a program for soldering with CuSi3 O 0.8 mm and 1.0 mm filler metal. The FANMIG 212 LCD is a compact unit, i.e. the power source and feeder are in one housing. A gas cylinder with a maximum height of up to 120 cm can be placed on the rear shelf. The device is powered from a single-phase 230 V mains. The device uses a PFC (Power Factor Correction) filter. The advantages of inverters with built-in PFC are higher energy efficiency, lower load on the network (weaker fuse), greater tolerance to fluctuations in the supply current and less interference generated by the device. The 4-roll wire feeder allows welding with wire from 15 kg / K300 spools. Recommended diameters of steel wires are 0.8 mm and 1.0 mm, for aluminum 1.0 mm. After changing the polarity, you can also use O 0,8-0,9 mm self-stripping powder wires. Primary use: light repair work, auto body repair, crafts, making light steel structures, hobbies. The control panel is equipped with a color LCD display, showing messages in Polish. Parameter setting is done using two dials, with which we select and accept the various functions and their values. Model FANMIG 212 LCD Power supply 1x230/ 50-60 V/ Hz Welding current range MIG/MAG 25-200 A TIG 10-200 A MMA 10-200 A Idle voltage (MMA) U0 67 V Mains protection 16 C (delayed) Ieff current 16 A (MMA) I1max current 30.5 A Duty cycle X MIG/MAG 200 A/30%; 150 A/60%; 130 A/100% TIG 200 A/35%; 160 A/60%; 140 A/100% MMA 200 A/25%; 140 A/60%; 120 A/100% Wire feed speed 1.5-17.0 m/min Insulation class F Degree of protection IP 23S Rollers 4 x 30/22 Dimensions 474 x 911 x 670 mm Weight 44.5 kg Warranty 24 months Part number 51 00 023700 Completion: The unit is supplied with ground and covered electrode welding cable, gas hose and instruction manual, standard rollers for 0.8-1.0 mm steel wire.