Inverter semi-automatic welding machine FANMIG 340i MOST

FANMIG 340i is a modern inverter semi-automatic welding machine for MIG/MAG or coated electrode MMA welding. FANMIG 340i is a natural successor to older compact semi-automatic machines with stepped welding current control ("transformer"), such as FANMIG 320-4 MOST. The device is used for welding steel, stainless steel or aluminum after rearming the feeder and welding chuck. Welding parameters (voltage and wire feed speed) are set infinitely. The FANMIG 340i is a compact device, i.e. the power source and feeder are in one housing. The device is powered from a three-phase 3x400 V mains. The 4-roll wire feeder allows welding with wire from 15 kg / K300 spools. Recommended diameters of steel wires are 0.8 mm; 1.0 mm or 1.2 mm, for aluminum 1.0 mm. After changing the polarity, you can also use O 0,8-0,9 mm self-stripping powder wires. Primary use: repair work, auto body repair, craftsmanship, making light steel structures, stationary welding. The control panel is equipped with two displays of welding parameters. Parameter setting is done using two knobs, the arc can be adjusted by inductance. Switches are used to select the welding method MIG / MMA or the operation mode of the welding handle button 2T/4T. Model FANMIG 340i MOST Power supply 3x400 V MIG/MAG MMA welding current range 50-350 A 20-350 A Idle voltage U0 61.5 V Mains protection 25 A Ieff current 14,5 A (MMA) Current I1max 23 A Duty cycle X MIG/MAG and MMA 350 A / 50% 285 A /60% 221 A /100% Wire feed speed 1 - 18 m/min Insulation class F Degree of protection IP 21S Rollers 4 x 30/22 Dimensions 900 x450 x 755 mm Weight 52 kg Warranty 24 months Part number 51 00 023730 Completion: The machine is supplied with a mass cable, gas hose and instruction manual, standard rollers for 1.0-1.2 mm steel wire.