FANMIG J23 MOST inverter semi-automatic welding machine

MOST FANMIG J23 semi-automatic welding machine. FANMIG J23 MOST is a modern inverter semi-automatic welding machine for MIG/MAG welding. The device is used for welding steel or stainless steel in a shield of gas mixtures, for use in craftsmanship, auto body, hobby work, etc. The welding parameters are set by the front panel of the welder. The device is powered from a single-phase 230V mains. The wire feeder allows welding with wire from spools of 15 kg/B300 and 5 kg/D200. The recommended diameters of steel wires are 0,8 mm and 1,0 mm. Due to the size of the device, the height of the gas cylinder must not exceed 120 cm, and the diameter is a maximum of 20 cm. The device is protected against overheating by a thermal sensor. The device is made in accordance with EN 60974-1 Larger welding current than similar traditional semi-automatic machines powered by 230 V mains. Very good welding properties. Setting the welding current potentiometer and the wire feed speed potentiometer to the same position (e.g., both at 9 o'clock, 12 o'clock, etc.) guarantees a stable, quiet welding arc with minimal spatter. Robust cart suitable for carrying a small cylinder, front swivel wheel with brake. Welding current display. Only metal parts of the wire feeder, standard type 22/30 rollers. Euro-socket for connecting any MIG/MAG holder. Durable housing, powder-coated covers. Low weight of only 24 kg. Quiet fan. Brand proven in the industry.