MAGNUM SNAKE 200P MMA electrode welding machine

. . The Snake 200 P inverter machine is a lightweight, portable power source.It is used for shielded electrode welding of various steels including ordinary, rusting, rust-resistant and cast iron. It is designed to work in field conditions and perform all kinds of repair work. The device has a high efficiency of 200 A/60%.It has excellent arc characteristics for both rutile and basic electrodes.Additional features:Arc Force - this is a function that provides the best settings to achieve a stable arc and a low amount of spatter, the simplest way to describe it is "arc dynamics", that is, shortening the arc length is accompanied by an increase in welding current, which results in stabilizing the arc, regardless of its length. The operation of the ARC FORCE function is to increase the power delivered to the arc when a droplet of molten metal short-circuits the electrode and the material, which causes the droplet to move quickly and prevents short-circuiting.Anti Stick - limits the short-circuit current by not lighting the electrode in the event of stickingHot Start - this is a temporary increase in welding current to facilitate the ignition of the electric arc and preheat the welded material, which prevents the phenomenon of "sticking of the electrode" in the initial phase of welding making it easier to start the welding process.. . . The welder can also be used for TIG welding using a special TIG handle with a valve (TIG LIFT method). Arc ignition is then carried out by lightly rubbing the non-fusible electrode against the material to be welded.application hand MMA welding with covered electrodes, welding of ordinary and higher strength structural steels, shipbuilding steels and boiler steels, welding of cold and hot cast iron, welding of stainless steels, possibility of TIG lift welding - with the purchase of a TIG valve welding fixture where arc ignition is performed by lightly rubbing the tungsten electrode against the welded material . . . . . Inclusive:Magnum Snake 200 P welderWelding cables with mass and electrode holderRutile electrodes 4.5KGMagnetic angle bar 12kgAPS 510 visor Brush hammer . . . Technical Data:Welding Current: 200AEfficiency: 60%Power supply: 230V/50HzPower protection: 25ACasing protection: IP21Cooling: fanOutput voltage: 59VRange of adjustment: smooth . . . . . Welding visors APS with variable degree of protection DIN 4/9-13, variable brightening time and adjustable sensitivity of sensors.Designed for MIG/MAG, TIG and TIG PULSE and MMA welding, equipped with grinding function.High quality LCD filters in optical class 1/1/1/2.Power source: photovoltaic cell + replaceable battery.4-arm adjustable headgear for comfort.EN175B compliant shell for greater impact resistance.PHYSICAL PARAMETERS TECHNICAL APPLICATIONSPlasma cutting: √MIG/MAG ; MMA: √Sanding: √TIG, minimum current: √, >10AResponse time: