. . Single-phase powered semiautomatic welding machine MIDI MIG 220 made with inverter technology IGBT for MIG/MAG (gas shielded) or FLUX (non-gas shielded) welding and welding with direct current (DC) covered electrodes.Designed for welding with welding wires of 0.6-1.0 mm diameter, 0.9 mm self-shielded wires and shielded electrodes of up to 4 mm diameter of low-carbon steel, low-alloyed steel (MAG), alloyed steel (MIG), aluminum and cast iron.Max spool 5 kg D200.The MIDI MIG 220 semi-automatic machine has: welding current parameter display two digital welding current parameter displays (voltmeter, ammeter) electronically controlled fluent welding current control electronically controlled fluent wire feed speed control overload protection. quick wire feed button LED indicator lights: power (green) and overload (red) Designed for workshop and field work.ONE OF THE MOST CHOSEN HOME & WORKSHOP EQUIPMENTS. . . . . The Midi Mig 220 welding machine is designed for work that takes place both in the workshop and in the field, while at the same time belonging to a group of products that are effective in their operations and very durable. The Midi Mig 220 semi-automatic welding machine is one of the best solutions in terms of performance and reliability.BALANCES OF THE DEVICE EURO 3M welding chuck WELDING CURRENT 15-.220 A Manual parameter adjustment INDUCTIBILITY REGULATION Low weight and mobility of the machineProfeslonal metal feeder . Push button wire feedSpace for gas cylinderPossibility to weld without gasClear and easy-to-use control panel allows quick selection of parameters . . . When welding by MIG-MAG method, it is possible to regulate: welding current, wire feed speed.Wire feeder: 2-roller, with 0.6-0.8 roller for steel wire.Fan-cooled.Overload protection.IGBT - the welder uses modern transistors, a solution to ensure a minimum of electromagnetic interference low power loss in the basic circuits, allowing to increase the efficiency and reliability of the current source.FCAW - the ability to weld core wire without using a gas cylinder. The wire itself (FLUX) is filled with a substance that produces gases during welding.Inductance Adjustment - allowing less heat to be introduced into the welding area. The sheet metal does not deform and the protective layer of zinc is not damaged, useful in lute welding. . . . . Price of the device with a set of MIG/ MMA accessories: MB 15 3 m welding chuck welding cable 2,5 m with 200A electrode holder (DX25) 2 m ground wire with 200A clamp (DX25) 2 m power cord with 230V plug 230V socket on rear panel 8 mm hose connection for gas line welding discbrushWelding handle consumables . . . . . TECHNICAL CHARACTERISTICS:Welding current adjustment range [A] MIG - 15-220MMA 20-180Capacity max at 40°CEN 60974-1220A @60%170 @100%Power supply: 230V/50HzPower protection: 25AApplicable bobbin weights: 1-5kgWire diameter 0.6-1 mm Cabinet protection: IP21Cooling: fanAdjustment range: smoothWeight: 14 KG.