Venetian mirror foil on meters 100 x 152 cm

SALE SUBJECT:Venetian mirror film for glass.Size:152cm x 100cm2pcs=152cm x 200cm3pcs=152cm x 300cm4pcs=152cm x 400cmitdWe do not cut the film to sizeMirror film Profilms20 can be used for windows of houses, office rooms, store windows, etc. The film is an imitation of a Venetian mirror so it does not stop 100% of the reflected light like a typical Venetian mirror works, but the film lets some of the light through and the reflected part is so significant that the resulting image from the outside resembles the appearance of an ordinary mirror, from the inside the film darkens by about 30%, the best Venetian mirror effect can be obtained on a sunny day. In the evening, with the light on, the mirror effect disappears. We apply the film indoors. The best effect of a Venetian mirror is obtained between two rooms - one of them is darkened and the other is brightly lit. People in the bright room can see their own reflection. Light from the dark room also passes into it, but the human eye, seeing the much brighter reflection from the bright room, does not perceive this light. On the other hand, in a dark room, the light passing through the mirror has a much higher intensity than that reflected from the mirror, so the occupants can freely observe the brighter room as if through glass. Applying the films from the inside of the room , you will get the effect of a mirror looking from the outside .An additional advantage of sunscreen films is to keep the heat inside the room during the winter ! Thanks to the use of the film we have small energy losses !VERY IMPORTANT !It is the most universal film of the Venetian mirror family because it lets the most light into the room. The tinting of the glass has a delicate shade of blue color, maintaining a strong Venetian mirror effect on the outside of the room.The reflection of the sun's rays is preserved at 80% !!!NOTE !The mirror effect ( invisibility ) is only preserved during the day with the lights turned off inside the room.1. Thoroughly clean(dirt will cause the film to peel off and unsightly blisters) and degrease the glass.2. Cut the film, when cutting, you need to leave about 1-2 cm beyond the ends of the glass due to the fact that it will be easier to position the film on the glass (in case the film is not cut to size).3. Spray the glass and the film with window film installation fluid or solution (10 ml of fluid per 1l of water) - this will make it easier to move the film after sticking.4. After peeling off the backing layer(for this purpose, stick the adhesive tape on both sides and delaminate) and sticking the film on the glass, get rid of air bubbles and excess water collected under the film using a squeegee(squeegee is best wrapped in a paper towel or felt), smoothing from the center towards the edges.5. Trim the excess film around the edges with a wallpaper cutter, helping yourself with the squeegee6. When all is done, leave the glass to dry.