STELLIT Lumber Saw 120x1.1x6160 Ro-Ma

h1>Stellitized band saw 120x1.1x6160Information about the auctioned product:- length 6160 mm- width 120 m- thickness 1.1 mm- t-40 pitch (154 teeth)- angle of attack 21 degrees- kerf 2.2 mm- molding 1/2- German steelSaw prepared for work ,welded,molded,stellited,sharpened.Basic InformationSaws (including double-sided saws) are available in: raw, roughened, stellited. Available tooth types: R (for rasping) , Z (for roughing), S (for stelliting). Available pitches: t=25-50 mm.Saw hardnessSaw body 44-46 HRC , coarse blade46-48 HRC , stellited blade 49-51 HRCPurposeSaws designed for sawing round wood and prisming.Rip saws wide band saws show high efficiency in sawing soft wood species and fresh wood.Rolled saws wide band saws show high efficiency in sawing hard wood species and frozen wood.Stellite saws wide band saws show high efficiency in sawing some tropical zone woods having mineral inclusions, e.g. makore, azobe. Foreign bodies in the form of fragments up to 1 mm thick do not damage the blade.Stellites are characterized by special resistance to thermal overheating of the serrations, retaining their cutting properties at temps up to 800°C. The chemical composition of stellite: cobalt 65%, chromium 25%, tungsten 8%, admixtures of other metals 2%The double-toothed version of the saw brings tangible benefits: shorter processing time of raw material, work on the return (no idle runs), increased productivity.Conditions of useCooling - saws require very abundant cooling to avoid overheating.Operation time (h + 12 h rest = sharpening)Forking saws 1-2 h Ripped saws2-3 h Stellite saws3-4 hSharpening, reaming, roughing, stelliteAfter sharpening band saws, follow the instructions of the sharpener manufacturer. Reaming, coarsening at 1/2 or 2/3 of the height of the tooth, measured from the tip, depending on its height.Reconditioning of saws includes:planing, tensioning and alignment.It is necessary to specify the place of spinning on the guide wheels (usually occurs in 1/2 or 1 /3 of the width of the saw). We regenerate wide band saws.Regeneration includes saw preparation, stellite and sharpening.We harden and ream wide band saws to width: b= 95 mm, ream saws to pitch t=35 mm.We make saws to any customer's size.