Pump multi-piston axial pivoting Hydro Leduc, type XPi80, with flow capacity 80.0l/min (at 1000 rpm./min), with universal rotation direction¹, with shaft pivot according to ISO 14:1982 (DIN 5462).. BASIC DATA. . Geometric working volume. 80.0 cm3/cir. Flow capacity (at 1000 rpm). 80.0 l/min . Maximum operating pressure (continuous) 380 bar . Direction of rotation¹. universal . Maximum speed (continuous) 2150 rpm . Drive shaft pivot . B8×32×36 ISO 14:1982 (DIN 5462) Mounting flange. 4×ø12.75 ISO 7653:1985 Typical applications. trucks . Country of origin. France . Manufacturer's website. www.hydroleduc.com . FINAL INFORMATION. . Torque (at maximum pressure). 509 Nm . bare weight. 14.84 kg . Operating temperature of oil (permissible range) . -20÷100 ° C . Recommended oil viscosity² 10÷400 cSt . Axial length when mounted . 241.7 mm . Spring connection. G 1" female thread (according to BSPP²). Discharge connection. G 1" female thread (according to BSPP²). . The direction of rotation is determined by looking at the pump from the journal side of the shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Starting the pump with the wrong direction of rotation may cause damage to the pump. . The pump is not suitable for operation with oil-in-water emulsions (HFA, HFB, HFC) and non-oil synthetic hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mine Safety. . British Standard Pipe Parallel - British Standard Pipe Parallel, inch thread roller, one of the threads tube Whitworth (BSP) denoted by the letter G. . Note: The technical and operational parameters of the product given above are for information purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data is provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below).