Pump multi-piston Hydrocar, type PE 60 with a flow rate of 60.0 l/min (at 1000 rpm)./min), with universal rotation direction¹, with shaft pivot according to ISO 14:1982 (DIN 5462).. BASIC DATA. . Geometric working volume. 60.0 cm3/cir. Flow capacity (at 1000 rpm). 60.0l/min . Maximum operating pressure (continuous) 290 bar . Direction of rotation¹. universal . Maximum speed (continuous) 1800 rpm . Minimum speed 300 rpm . driveshaft pivot . B8×32×36 ISO 14:1982 (DIN 5462) Mounting flange. according to ISO 7653:1985 . Typical application. trucks . Country of origin. Italy . Manufacturer's website. www.hydrocar.com . FINAL INFORMATION. . Torque (at maximum pressure). bare weight. 10.6 kg . Operating temperature of oil (permissible range) . -10÷80° C . Recommended oil viscosity² 12÷100 cSt . Axial length when mounted . 232.5 mm . Cross-section Suction connection G 1¼" female thread (according to BSPP³) Discharge connection. G 1" female thread (according to BSPP³) . . The direction of rotation is determined by looking at the pump from the journal side of the shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Starting the pump with the wrong direction of rotation may cause damage to the pump. . The pump is not suitable for operation with oil-in-water emulsions (HFA, HFB, HFC) and non-oil synthetic hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mine Safety. . British Standard Pipe Parallel - British Standard Pipe Parallel, inch thread roller, one of the threads tube Whitworth (BSP) denoted by the letter G. . Note: The technical and operational parameters of the product given above are for information purposes only. The owner and administrator of the online store hydromech.eu are not responsible for their compliance with the parameters of the product supplied by the manufacturer. The source data is provided in the manufacturer's brochure, which can be downloaded from the "Download" tab (below)..