Check what direction of rotation you have. Pump an externally mesh gear pump Hydrocar, type BPS 11, with a flow rate of 11.5 l/min (at 1000 rpm./min), with universal rotation direction¹, with shaft journal according to UNI (DIN 5482). New version of the 200NFL pump . . BASIC DATA. . Geometric working volume. 11.5 cm3/cir. Flow capacity (at 1000 rpm). 11.5 l/min . Maximum operating pressure (continuous) 280 bar . Direction of rotation¹. universal . Maximum speed (continuous) 2200 rpm . Minimum speed 450 rpm . driveshaft pivot . B13×19×22, UNI (DIN 5482) . Mounting flange. according to UNI standard (3 holes) . Typical application. trucks . Country of origin. Italy . Manufacturer's website. www.hydrocar.com . FINAL INFORMATION. . Torque (at maximum pressure). bare weight. 5.5 kg . Operating temperature of oil (permissible range) . -10÷80° C . Recommended oil viscosity² 12÷100 cSt . Axial length when mounted . 143.5 mm . Cross-section 117×? mm suction port G ½" female thread (according to BSPP³) Discharge connection. G ½" female thread (according to BSPP³) . The direction of rotation is determined by looking at the pump from the journal side of the shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Starting the pump with the wrong direction of rotation may cause damage to the pump. . The pump is not suitable for operation with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mine Safety. . British Standard Pipe Parallel - British Standard Pipe Parallel, inch thread roller, one of the threads tube Whitworth (BSP) denoted by the letter G. . . Note: Th