See HOW TO CHANGE THE RPM OF A PUMP, CLICK HERE. Pump tilt-axis multiviewer Hydrocar, type F0X 64, 201FX064D7E with a flow rate of 64.08 l/min (at 1000 rpm)./min), with right-hand rotation direction¹, with shaft pivot according to ISO 14:1982 (DIN 5462).. . BASIC DATA. . Geometric working volume. 64.08 cm3/cir. Flow capacity (at 1000 rpm). 64.08l/min . Maximum operating pressure (continuous) 450 bar . Direction of rotation¹. right-handed . Maximum speed (continuous) 1900 rpm . Minimum speed 300 rpm . driveshaft pivot B8×32×36 ISO 14:1982 (DIN 5462) Mounting flange. according to ISO 7653:1985 . Typical application. trucks . Country of origin. Italy . Manufacturer's website. www.hydrocar.com . FINAL INFORMATION. . Torque (at maximum pressure). bare weight. 13.5 kg . Operating temperature of oil (permissible range) -10÷80° C . Recommended oil viscosity² 12÷100 cSt . Axial length when mounted . 240 mm . Cross-section 173×110 mm . suction port G 1¼" female thread (according to BSPP³) Discharge connection. G 1" female thread (according to BSPP³) . . The direction of rotation is determined by looking at the pump from the journal side of the shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Starting the pump with the wrong direction of rotation may cause damage to the pump. . The pump is not suitable for operation with oil-in-water emulsions (HFA, HFB, HFC) and non-oil synthetic hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mine Safety. . British Standar