Gear hydraulic pump, 200BPH0900S, Hydrocar BPH 90, bi-directional, ISO

Check what direction of rotation you have. Outboard gear pump Hydrocar, type BPH 90, with a flow rate of 88.8 l/min (at 1000 rpm)style./min), with universal rotation direction¹, with shaft journal according to ISO 14 (DIN 5462).. BASIC DATA. . Geometric working volume. 88.8 cm3/cir. Flow capacity (at 1000 rpm). 88.8 l/min . Maximum operating pressure (continuous) 250 bar . Direction of rotation¹. universal . Maximum speed (continuous) 1800 rpm . Minimum speed 300 rpm . driveshaft pivot . B8×32×36, ISO 14 (DIN 5462) . Mounting flange. according to ISO standard (4 holes) Typical application. trucks . Country of origin. Italy . Manufacturer's website. www.hydrocar.com . FINAL INFORMATION. . Torque (at maximum pressure). bare weight. 20.8 kg . Operating temperature of oil (permissible range) . -10÷80° C . Recommended oil viscosity² 12÷100 cSt . Axial length when mounted . 226 mm . Cross-section 159×168 mm . suction port G 1¼" female thread (according to BSPP³) Discharge connection. G 1¼" female thread (according to BSPP³) . The direction of rotation is determined by looking at the pump from the journal side of the shaft. Right-hand direction - clockwise, left-hand direction - counterclockwise. Starting the pump with the wrong direction of rotation may cause damage to the pump. . The pump is not suitable for operation with oil-in-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Commission for Mine Safety. . British Standard Pipe Parallel - British Standard Pipe Parallel, inch thread roller, one of the threads tube Whitworth (BSP) denoted by the letter G. . . Note: The technical and operational parameters of the product listed above are for information purposes onl