LED angle profile - applied GLAX champagne L=2 m

Aluminum angle LED profile - applied GLAX champagne L=2 m. The current trend is to move away from light points to linear lighting, based on LED strips. When operating, the tape generates heat, which must be dissipated from it. Otherwise, the tape may wear out prematurely. Special GLAX aluminum profiles are used to dissipate heat from the tape. In order to effectively dissipate heat from the tape onto the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before gluing the LED tape into the GLAX profile, the center of the profile must be degreased. The angle profile is used in the corners of the furniture development, most often under the hanging cabinets in the kitchen and under the shelves in the closet.. In the case of an angled, overlapping profile, special mounting brackets are used, which have small plates that curve inward to hold the profile in place. It is recommended that the distance between the grips be no more than 1 meter. The mounting brackets are screwed to the selected surface with a Ø 3 countersunk screw. It is very important that the diameter of the screw head does not exceed 6 mm.