. . ALUMINIUM BRUSH PUMP, GROUP 2.5, 2.5PB22D-P38P2 EUROPEAN TYPE - USED IN URSUS MIKRUSPOSSIBILITY TO CHANGE DIRECTION OF ROTATIONBASIC DATAGeometric Working Volume: 22.2 cm3/rev./minDrive shaft shaft pin: cone 1:8, M14 x 1.5Mounting flange: European 120 x 150 mmTypical application: industry, agricultureCountry of origin: ItalyManufacturer's website: www.salami.itCOMPLEMENTARY INFORMATIONOil weight: 3.8 kgOperating temperature of oil (permissible range): -15÷85° CRecommended oil viscosity²: 17÷65 cStAxial length after installation: 125 mmCross section: 150 x 120 mmFittings: 4 holes, diamond (4xM10 x Φ30)The direction of rotation is determined by looking at the pump from the shaft journal side. Clockwise direction - clockwise, counterclockwise direction - counterclockwise. Activation of the pump with the wrong direction of rotation may cause damage to the pump.The pump is not suitable for operation with oil-water emulsions (HFA, HFB, HFC) and synthetic non-oil hydraulic fluids (HFD) - according to the 5th Report of the European Mining Safety Commission. . .