. . . . . PRESKO brand 12V electrically controlled three-section hydraulic distributor with flow rate up to 40l/minThe distributor is successfully used in many agricultural, construction and industrial machines, where convenience and radio control of the hydraulic system is important. Great for loaders, cyclops, plows, excavators, etc. BASIC DATA:oil flow rate: 0 - 40 l/minnumber of sections: 3nominal voltage: 12Voil temperature range: from -20°C to +80°Cbypass valve set at: 180barmaximum operating pressure: 20Mpacast steel body with anti-corrosion coating. . . . CONTROL - THREE-POSITION (1-0-2) sliders:. Position 0 neutral actuator piston rod stands - oil goes to overflow - the slider is on a spring, so it automatically returns to neutral position immediately when the current is cut. Working position 1 - the piston rod of the actuator extends - when current flows into coil one. Working position 2 - actuator piston rod retracts - when current flows into coil two. . . CONNECTION:NUMBER OF OUTPUTS WITH OUTPUTS TO THE ENGINEER IS DUE TO THE NUMBER OF SECTIONS OF ANY DISTRIBUTOR.OIL SUPPLY: P1OIL OUTPUT: T1 / T2OIL OUTPUTS TO ENGINEER: A1, A2 / B1, B2 / C1, C2SERGE CONNECTION: Port N - in order to connect in series with another manifold, it is necessary to use PRESKO pressure sleeve, available on our other auctions. . . . Electrical plugs:. They are included with the distributor and are plugged into the electrical coils with three pins - connection is very simple. . . . Remember that:. PRESKO distributors are used by many Polish and foreign manufacturers of agricultural, construction and industrial equipment. The manifold allows easy serial connection to another manifold using a pressure sleeve - the sleeve is available on our other auctions - it should be screwed into the N-port. High quality materials used in production guarantee long and trouble-free operation. Solid and compact monoblock design will facilitate installation. The distributor is equipped with a safety valve. . .