. . . Orbitrol OSPC 100 ON set with 1/2'' to M18x1.5 connection nipples. . . Orbitrol OSPC 100 ON is responsible for controlling the hydraulic steering system in agricultural tractors, harvesters, forklifts, construction machines and agricultural machinery.Applied, among others, in the following models:URSUS: C-330 , C-360 , C-360-3P , 3512 , 3502 and derivativesMTZ: 80 , 82 , T-25 and derivativesZETOR: 5211 , 7211 ; 7045 , 7245 and derivativesCASE IH AVJ: 55, 60, 70, JX 55, 60, 65, 70, 75, 80, 85, 90, 95, VJ 60, 70, 80 and derivativesFIAT: 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-66, 60-66, 65-66, 70-66 80-66 , 55-88 , 60-88 , 65-88 , 70-88, 80-88 , 55-90, 60-90 , 65-90 , 70-90 , 80-90 , 90-90 , 100-90 , 110-90 , 60-93 , 65-93 , 60-94 , 65-94 , F 100, 110, 130MASSEY FERGUSON: 230 , 240 , 253 , 255 , 261 , 263 , 340 , 342 , 350 , 352 , 355 , 360 , 362 , 365 , 372 , 375 , 382 , 390 , 396 , 398, 399, 265 , 275 , 3275E , 285 , 290 , 290E , 298 , 375E , 390E , 675 , 690 , 698 , 698T , 699,GENERAL TECHNICAL DATA: Connections: P , T , A , B female threads [BSP]: 1/2" Steering column mount: 4x M10 - 16mm bolt Valve setting: 160bar bypass , 240bar shock Geometric volume: 100cm3/rev. 12 notches per shaft Recommended system oil flow: 8 to 12L/min.. . . . . IMPORTANT- PRESKO orbiters are well-known and widely used replacements for OSPC orbiters, which you will find in many vehicles with hydraulic control- High precision manufacturing and high quality alloys and seals guarantee long and trouble-free operation, even with heavily loaded axles. . . . . Four dedicated nipples are included to connect the orbiter to the hydraulic lines. Nipples are equipped with a rubber seal (on the side of the orbitrol body) and a self-sealing cone on the side of the hydraulic hose or elbow.This form of connection guarantees a complete tightness of the system.Nipples: 1/2'' to M18x1.5. . . . .