CO2 laser engraving plotter 4040 - 50W lifting table

The CO2 laser plotter 40cm*40 cm 50W with lifting table is used for engraving in materials such as: plexi, leather, rubber, wood, plywood, paper, cork, textiles, all kinds of engraving laminates, etc. The device is additionally equipped with a professional head with ZnSe USA lens . The head , optics elements and linear guide ensure perfect precision as well as accuracy while working on this plotter. Specification: . Communication: USB 2.0 interface. Working area: 400x400mmLaser power: 50W. Laser type: CO2. Engraving speed: 350mm/s MaxGraving depth: 1.2mmCutting depth (in acrylic): 5mmCutting speed: 0-35mm/s. Minimum mark: 1x1mmResolution: 0.0254mm (1000dpi). Power supply: 220V(or 110V)+/-10% 50Hz. Power consumption: 300WTemperature at operation: 0-45℃Supported graphic formats: PLT/DXF/BMP/JPG/GIF/PGN/TIF. Operating system: Windows XP/ Windows 7/8. Engraving on curved surfaces: No Water cooling: Yes. Wymiary: 850x700x310mmWeight: 40kg(with packaging 48kg). Certified CE: YESGuarantee: 12 months. Tube Warranty: 6 months Equipment: PlotterFan. Cooling water pump. Extraction pipe. USB cablePower cable. Software. Machine USB key. Equipment is tested prior to shipment, as well as mirror settings are calibrated so that the plotter is already ready to use when removed from the crate.NOTE: For your safety, the plotter is shipped in a special wooden crate - there is no possibility of damage during transport.