Stepper drivers 6.0A 20-80V DC

Stepper driver 6,0A 20-80V DC - 20 - 80V DC supply voltage - Max. current per motor phase up to 6A - Max. input pulse frequency 400kHz - inaudible switching frequency - perfectly quiet operation - input control signals optically isolated, TTL-compatible - automatic current reduction at idle - low heat generation - configuration of current per motor and microsteps via micro switches - 14 selectable operating modes using microsteps with both binary and decimal step division - microstep resolution of up to 51200 steps per revolution - suitable for 4-, 6- and 8-wire motors - protection against overload, overvoltage and short-circuit, too high temperature - small size (150x110x50 mm) Configuration switches - there are 8 two-state configuration switches available.A switch set on the heat sink side means on. The functions of the switches are as follows: SW1 SW2 SW3Phase current 2.00A; 2.57A; 3.14A; 3.71A; 4.28A; 4.86A; 5.43A; 6.00AProgression of microsteps per revolution SW5 SW6 SW7 SW8 microstep mode for motor 1.8 2/400 4/800, 8/1600,16/3200, 32/6400, 64/12800, 128/25600, 256/512005/1000,10/2000, 25/5000, 50/10000,125/25000, 250/50000 SW4 - rest current; if this switch is disconnected then the current used at rest will be twice as low as when moving.SK8060 is a stepper motor controller with microsteps based on advanced world technology. It can control any 2-phase or 4-phase stepper motor. Using SK8060 control, it allows you to get more speed and more power from the same motor. Without any problems, it is possible to achieve a speed of 20cm per second in machines and a speed of 6000 rpm on CNC PROFI motors. Professional workmanship makes it possible to use in CNC routers, CNC milling machines, CNC lathes, robots, manipulators. Our team of qualified employees is happy to provide advice and assistance in the selection of CNC control drives and accessories for machines. High quality of our products, comprehensive service and attractive prices are the motto of CNC PROFI company. Our products are used in every branch of industry, especially where reliability and reasonable price are required.