Cylinder seal 35x50 cuff 50x35x10

U-type cylinder seal, "cuff" is a universal seal used on both the piston and piston rod of a hydraulic or pneumatic cylinder, model TTU-1725 with dimensions: 50x35x10/11The U-type sealing ring is the most common used sealing found in hydraulic actuators, pneumatic actuators and other components that require assurance of tightness. Thanks to its symmetrical structure, the two lips are of equal height, which enables use both when mounted in the stuffing box (piston rod) and on the piston of the actuator. Specification of the seal: Inside diameter (piston rod) d: 35.00 mm Outside diameter (seat) D: 50.00 mm Overall seal height h: 10.00 mm Seat height H: 11.00 mm Material: Polyurethane (Tecnolan) Max. Working Pressure:400 Bar Working Temperature Range:-35°C - +110°C Max. Speed: 0.5 m/s Model Number: TTU-1725 Manufacturer: Guarnitec (Italy) Replacement for: U2, TM21, K21, GPU, MA25, KN25, UN, RPS.The highest quality materials are used in the production of Guarnitec seals.In the case of the GHK scraper seal, high quality polyurethane (Tecnolan) is used, guaranteeing: high mechanical strength, abrasion resistance and flexibility.The TTU seals we offer have clear model and dimensional markings . This makes it much easier to identify the product in case of later change or to choose the right dimension if you have many different models.In our offer you will find a wide cross-section of seals, including U-type, guide strips, o-rings, copper washers and a wide range of parts for actuators: pistons, glands, mountings (lugs, forks) and many others.