Automatic pole gripper Flux II / VDI 40 - 3-80 mm

Quick and easy installation - the working range of the gripper can be fully utilized without rearming Advantages and main features of the GRIPPEX rod gripper Lightweight and compact - thanks to this it is possible to fully engage the revolver. Strong - can withstand high coolant pressure (20 bar). This eliminates the need for a bleeder valve. Operates fully reliably from 0.5 bar of coolant pressure Handles directly on the chuck - ensures stable distribution of turned parts. Handles with 3 legs - thanks to this, easy handling of hexagonal bars in any angular position of the spindle. Equipped with robotic jaws, the device can also be used as a workpiece gripper. principle of operation The rod gripper is actuated by the coolant pressure of the CNC lathe. When the coolant is on, the gripper closes, when the coolant is off, it opens. It is picked up by the tool holder with coolant supply or directly on the VDI turret. A valve (screw on the release housing) allows the gripper to open quickly when the coolant system is equipped with a check valve, which delays the pressure drop on the gripper A suitable guide tube in the spindle is indispensable, not only to avoid vibration³" during rotation, but also to exclude excessive inclination of the current during extraction. programming example Restoring the position of the turret head using the rod gripper Moving the gripper to the gripping position on the rod. Turn on the coolant for the rod gripper. Loosen the chuck or collet Pull the rod to the programmed Z position with the programmed feed rate Tighten the chuck or collet Turn off the coolant to release the rod Approach the tool change point and pick up the first tool Grip surfaces 3 to 80 mm