FANMIG J5 Pulse inverter semi-automatic welding machine

For gas shielded MIG/MAG welding of steel or stainless steel or aluminum FANMIG J5 Pulse MOST is a modern semi-automatic welding machine for MIG/MAG short-circuit and pulse arc welding (pulse or double pulse) and also for MMA electrode welding. The machine is used for gas shielded welding of steel, stainless steel or aluminum. The main applications are craftsmanship, automotive sheet metal, hobby work, repairs, etc. The welding parameters are set on the front panel of the welder. Welding parameters are set synergistically. It is necessary to select the welding method, the grade of material to be welded and the diameter of the wire in order to start the corresponding program. Welding in 2-takt, 4-takt, spot, intermittent and also with crater filling is available. Numerous auxiliary functions are available in the internal MENU. The unit is powered by a single-phase 230-volt power supply. The wire feeder allows welding with wire from 5 kg/D200 or 1 kg spools. Recommended wire diameters for steel are 0.8 mm and 1.0 mm, for aluminum 1.0 mm or 1.2 mm. Fanmig J5 Pulse MOST forms a convenient set for work and transportation when placed together with a gas cylinder on the WUS HD MOST cart. The device is protected from overheating by a fan and a thermal sensor. The device is made in accordance with EN 60974-1. Advantages of Fanmig J5 Pulse MOST: Higher welding current than similar traditional Semi-Automatic machines powered by 230 V mains. Possibility of splinter-free MIG/MAG welding with pulse or double pulse current. MMA welding capability with VRD (reduced idle voltage) function. Effective ability to weld aluminum with 1.0 mm or 1.2 mm wire with ML 24 ALSGRIP handle of 2 m length Display of welding current and set parameters. Euro socket for connecting any MIG/MAG holder. Typical ground socket (35/50). Low weight due to inverter power source. Quiet fan.