Blank spindle stop HSP 38 Spindle fi 35 - 42 mm

The spindle stop is inserted into the hollow spindle from behind and tightened with a special wrench by tightening the clamping screw The clamping jaws are pressed against the inner wall of the hollow spindle This ensures that the stop is securely seated with the wrench The stop is released and moved to length An optimal auxiliary tool suitable for almost any lathe Satisfactory even for very small series Costly set-up times can be reduced to a minimum Easy and fast clamping at any point on the hollow spindle The spindle stop is inserted into the hollow spindle from the rear and tightened with a special wrench by tightening the clamping screw The clamping jaws are pressed against the inner wall of the hollow spindle This ensures that the stop is securely seated with the wrench The stop is released and moved to length An optimal auxiliary tool suitable for almost any lathe Satisfactory even for very small series Costly set-up times can be reduced to a minimum Easy and fast clamping at any point on the hollow spindle