DIGITIG 216P AC/DC inverter welder

DIGITIG 216P AC/DC inverter welder DIGITIG 216P AC/DC is used for manual DC and AC welding of structural steels with covered electrodes (MMA method) and quality steels and non-ferrous metals with non-fusible electrode in an inert gas shield (TIG method). The welder allows TIG welding with arc ignition by rubbing (TIG LIFT) and with ionization pilot arc (TIG HF). The device is made with IGBT technology and equipped with digital control. The welder allows digital adjustment and control of welding parameters of arc characteristics and pulse. It has adjustable ARC FORCE functions. HOT START and 2T/4T. During TIG welding, it is possible to adjust the current rise and fall, pre and post gas flow and pulse parameters. A TIG welding chuck and ground cable are included. SPECIFICATION Part number 7812245 EAN code 5903686610936 Welding methods/cutting/other TIG Lift (by rubbing) AC, MMA DC, TIG HF AC, TIG HF DC, TIG Lift (by rubbing) DC Supply voltage [V] AC 230 IGBT execution technology Max MMA welding current [A] 170 Max TIG AC welding current [A] 200 Max TIG DC welding current [A] 170 Duty cycle MMA [%] 40 TIG duty cycle [%] 35 No-load voltage [V] 79 Current rise time [s] 0 - 10 Initial current [A] 10 - 200 Base current [A] 10 - 200 Current falling time [s] 0 - 10 Crater current [A] 5 +- 100 % of welding current Gas pre-flow [s] 0.1 - 2 TIG gas postflow [s] 0 - 10 TIG pulse frequency [Hz] 0.5 - 200 TIG pulse width [%] 5-95 AC balance [%] -5-+5 Max power consumption MMA [kVA} 8,9 Max TIG power consumption [kVA] 6,4 Max MMA current consumption [A] 41 Max TIG current consumption [A] 33 Main TIG method Functions 2T/4T, Arc Force, Electrode cleaning function, Hot Start, Current ramp up, Current ramp down, TIG gas ramp down, Pre gas ramp up, TIG pulse, Digital control, LED display Mains protection [A] 25 Warranty period for companies [years] 1 Weight [kg] 12.12 Dimensions (L x H x W) [cm] 41 x 14.6 x 27.8 EQUIPMENT INCLUDED TIG T-17 ERGO welding bracket Ground wire