DIGITIG 315 AC/DC MULTIPRO welding kit

DIGITIG 315 AC/DC MULTIPRO welding kit The DIGITIG 315 AC/DC MULTIPRO digital welder is the latest generation device for professional applications. It is made with IGBT technology and equipped with digital control. It is used for manual TIG HF and TIG Lift welding of steels and non-ferrous metals with direct and alternating current. The device is equipped with a MMA (shielded electrode) welding option. The welder allows full digital adjustment and control of welding parameters of arc and pulse characteristics, as well as selection of AC current waveform. It has HF ignition, ARC FORCE function, 2T/4T switch and display indicating welding current and memory sets. The device has a memory of the last setting, that is, when it is turned off and turned on again, the last set parameters are restored. It is also possible to store 20 sets of pulse and welding current parameter settings. The set includes a liquid-cooled TIG welding chuck, electrode cable and ground cable. A powerful WS-7L cooler dedicated to this welder is included for cooling the welding handle. The construction of the cooler uses components of the proven WRC-300B cooler, the rebuild and the fluid reservoir have been changed. The use of a heat exchanger built on a copper coil and a stainless steel pump definitely increase cooling efficiency and extend the life of the device. The whole unit is built on a sturdy cart, with a very practical shelf for accessories and tools, as well as hangers for the holder and welding cables. SPECIFICATION Catalog number 7812423 EAN code 5903686618291 Welding methods/cutting/other TIG Lift (by rubbing) AC, MMA DC, TIG HF AC, TIG HF DC, TIG Lift (by rubbing) DC Supply voltage [V] AC 3×400 IGBT manufacturing technology Max MMA welding current [A] 280 Max TIG AC welding current [A] 315 Max TIG DC welding current [A] 315 MMA duty cycle [%] 60 TIG duty cycle [%] 60 No-load voltage [V] 67 Current rise time [s] 0 - 15 Initial current [A] 5-315 Base current [A] 10-90% of welding current Current falling time [s] 0 - 15 Crater current [A] 5-315 Gas pre-flow [s] 0.1 - 15 TIG gas postflow [s] 0.1 - 15 TIG pulse frequency [Hz] 0.5 - 999 TIG pulse width [%] 10-90 AC frequency [Hz] 1 - 250 AC balance [%] 15-50 Max power consumption MMA [kVA} 9,2 Max TIG power consumption [kVA] 6,3 Max MMA current consumption [A] 15,3 Max TIG current consumption [A] 13.7 Main TIG method Functions 2T/4T, Alarm, Arc Force, Electrode cleaning function, Microcontroller (MCU), Current ramp up, Current ramp down, Setting memory, TIG gas flow, Pre gas flow, TIG pulse, Digital control, AC waveform selection, LED display Mains protection [A] 16 Radiator supply voltage [V] AC 230 Pump power [W] 370 Cooling liquid flow [l/min] 8 Cooling liquid pressure [MPa] 0.3 Nominal cooling capacity [kW (1l/min)] 1.5 Tank capacity [l] 8 Warranty period for companies [years] 1 Weight [kg] 91 Dimensions (L x H x W) [cm] 105 x 72 x 110 EQUIPMENT INCLUDED Welding clamp T-18/4m Electrode cable Ground wire