Escape hook up to 30kV

Escape hook up to 30kV Escape hook up to 30kV DESIGN DESCRIPTION The rod is made of ø 32mm glass-epoxy fiber tube filled with polyurethane foam. On both sides it has evacuation hooks made of aluminum with radii of 250mm and 90mm. The hooks are covered with double-layer insulation, white and orange at least 1 + 1 mm made of plastisol by immersion technology. The rod has a handle stop separating the grip part from the insulation part. Manufacturing and testing of the product in accordance with EN 60832-1:2010. Total length: ~1820 mm. Weight: ~2.4kg APPLICATION The rod with escape hooks is designed to pull a person away from a live device up to 30kV by grasping the torso with a larger radius hook or the limbs with a smaller radius hook. STORAGE AND MAINTENANCE Store the equipment in a case in a way that protects it from mechanical damage. Store the equipment in dry rooms away from heat sources, in a non-chemically aggressive atmosphere. Protect from sunlight. Equipment should be cleaned after each use. Use a dry cloth for cleaning. If heavily soiled, clean with a cloth moistened with isopropyl alcohol and dry thoroughly. After drying, it is recommended to wipe the rod with a special cloth soaked in a silicone preparation, designed for the regeneration of insulating elements of equipment for live work. CHECK AND PERIODIC INSPECTION Carry out periodic inspection of the equipment component in accordance with the instructions for use. Periodic inspection includes visual inspection and electrical strength testing. Visual inspection includes checking: - absence of visible damage to the surface of the rod - absence of visible damage to the surface of escape hooks - legibility and completeness of markings - timeliness of periodic examinations - stability of the limiter mounting Electrical tests are considered positive if: - no spark-over occurred and no traces of discharge were found Damaged, heavily worn or dirty equipment must not be used for rescue operations. In case of moisture, the rod with hooks should be thoroughly dried. If doubts arise about its condition, it should be taken out of service and retested. FREQUENCY OF TESTING Periodic inspection should be carried out every 12 months.