SEMI-AUTOMATIC INVERTER MACHINE TECNOMIG 234 DIGITAL 4X4

SEMI-AUTOMATIC INVERTER MACHINE IDEAL TECNOMIG 234 DIGITAL 4X4 The machine has three synergistic MIG/MAG welding modes: MIG, MIG PULSE, MIG DOUBLE PULSE. TECNO MIG 234 PULSE has synergic programs for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels. active or mixture depending on the program selected on the control panel. Thanks to the use of MIG pulsation, there is an increase in the amount of heat introduced into the welded part. - peak current / base current control in double pulsation - inductance adjustment (MIG / Double Pulse) - adjustment of pulse amplitude in double pulse - adjustment of pulse width (filling) in double pulse - adjustment of pulsation frequency in double pulse - adjustment of spot welding time - adjustment of wire burning time after welding - the adjustment of the time of gas discharge before welding - the adjustment of the gas discharge time after welding The device also has accurate adjustment of MMA parameters such as: - ARC FORCE (MMA) adjustment - HOT START (MMA) current adjustment The device has a fan-cooling system which greatly increases its performance. The device is equipped with overload protection, which increases its reliability. Power supply parameters: 230V single-phase power supply Technical parameters: - Mains protection - C25A - Rated supply voltage - 230V, 50-60Hz, 1ph - Power - 6.53 kW - Maximum current - 200 A - Current at 100% operation - 160 A - Current at 60% operation - 200 A - Aluminum wire diameter - 1.0-1.2 mm - Diameter of self bonded wire - 0.8 mm - Diameter of steel wire - 0.8-1.0 mm - Diameter of stainless steel wire - 0.8-1.0 mm - Welding electrode diameter - 1.6-4.0 mm - Welding current adjustment range - 20-200 A - Wire spool size - D100 (0.45kg and 1kg), D200 (2kg and 5kg)