Aircraft ÖWAMAT® 14 oil/water separation system

Safe separation, efficient processing For treatment, the condensate containing oil first flows under pressure to the pressure reduction chamber (1) There, the condensate flow is "calmed" in order to freely separate the oil (2) Larger contaminants are caught by a special removable filter (3) Under the influence of gravity, the condensate is pre-separated into water and oil, which collects on the surface and overflows into the tank (4) with anti-overflow protection ( option ) The pre-treated condensate flows through an oleophilic pre-filter (5), which has a large active surface area. Flowing from the inside out, it binds the remaining oil droplets and also absorbs the residual, floating oil in the filter chamber In the main OEKOSORB filter with cartridge technology (6), the remaining residual oil is effectively retained. The separated condensate water can now be safely discharged into the sewer system Advantages of the unit Dimension to fit the installation Long filter life The unit can be retrofitted with a heater Easy operation thanks to cartridge technology Approved for use with and without oil separation No energy costs Technical data: Screw compressors**: 9.6 - 14.6 m³/min Reciprocating compressors**: 8.4 - 10.1 m³/min Tank capacity: 61.3 l Filling capacity: 41.5 l Oil tank: 2 x 5 l Weight: 18.5 kg Operating temperature: 5 - 60 °C Max. operating pressure: 16 bar Pre-filter: 6.7 l Main filter: 11 l Condensate inlet: 3 x G 1/2" 1 x G 1" Water drain: 2 x G 1/2" Oil drain: DN 25 Dimensions max (L x W x H): 410 x 461 x 892 mm These figures apply to temperate climates (e.g., Central and Southern Europe, Central America). ** Depends on the lubricating oil used. For detailed characteristics, please refer to the equipment manual. If necessary, ask for compressor specifications for other climate zones.