WELDING CHUCK FOR MIGOMAT MB 25 3M TYPE BINZEL

PROFESSIONAL WELDING CHUCK MIG MB25 3M TYPE BINZEL GRIP The holder is designed for manual MIG MAG welding with gas shielded welding wire. The holder is cooled with shielding gas. It is terminated with a standardized EURO type plug that fits most semi-automatic welding machines. Supplied with a spring-loaded strain relief to prevent bending of the cable. Standard lengths of the holders are 3m, 4m, 5m MAG method is used for welding of low-alloy steels in Co2 or gas mixtures. MIG method is used for welding high-alloy steels and non-ferrous metals in Argon shielding Teflon or Teflon-carbon guide inserts are recommended for welding light alloys Standard handle lengths are 3m, 4m, 5m THE HOLDER IS EQUIPPED AS STANDARD WITH ACCESSORIES FOR WELDING WITH WIRE OF 0.8 MM DIAMETER TECHNICAL DATA: Meets the requirements of PN-EN 60974-7 standard Range of electrode wire diameters: 0.8 - 2.4 mm Protective gas flow rate: 10 - 18 l/min Length of cable and hose assembly: 3 meters Type of cooling - with gas Current carrying capacity in X60 - CO2 duty cycle: 230 A Current carrying capacity in working cycle X60 - mixture: 230 A Degree of protection of the connection and handles: IP-+3X according to PN-EN 60529 STANDARD SPARE PARTS (BINZLA Standard): TW-25 gas nozzle M6 x 28 current tip current coupling TW-25 current-gas cable guide insert TW-25 3m EURO plug PROFESSIONAL WELDING CHUCK MIG MB25 3M TYPE BINZEL GRIP The holder is designed for manual MIG MAG welding with gas shielded welding wire. The holder is cooled with shielding gas. It is terminated with a standardized EURO type plug that fits most semi-automatic welding machines. Supplied with a spring-loaded strain relief to prevent bending of the cable. Standard lengths of the holders are 3m, 4m, 5m MAG method is used for welding of low-alloy steels in Co2 or gas mixtures. MIG method is used for welding high-alloy steels and non-ferrous metals in Argon shielding Teflon or Teflon-carbon guide inserts are recommended for welding light alloys Standard handle lengths are 3m, 4m, 5m THE HOLDER IS EQUIPPED AS STANDARD WITH FITTINGS FOR WELDING WITH WIRE WITH A DIAMETER OF 0.8 MM TECHNICAL DATA: Meets the requirements of PN-EN 60974-7 standard Range of electrode wire diameters: 0.8 - 2.4 mm Protective gas flow rate: 10 - 18 l/min Length of cable and hose assembly: 3 meters Type of cooling - with gas Current carrying capacity in X60 - CO2 duty cycle: 230 A Current carrying capacity in working cycle X60 - mixture: 230 A Degree of protection of the connection and handles: IP-+3X according to PN-EN 60529 STANDARD SPARE PARTS (BINZLA Standard): TW-25 gas nozzle M6 x 28 current tip current coupling TW-25 current-gas cable guide insert TW-25 3m EURO plug