ESAB CADDY TIG 1500i DC TA34 inverter power source

The Caddy Tig 1500i (panel TA34) is an ergonomic and portable inverter power source for TIG and MMA welding with HF or LiftArc arc starting. The Caddy Tig 1500i (panel TA34) is an ergonomic and portable inverter-based power source for TIG and MMA welding with HF or LiftArc arc voltage. Extremely rugged and impact-resistant device with OCK 50 connector. Easy to use. Digital display for setting welding parameters. Remote control capability. Pulsed TIG increases control of heat transfer to the workpiece and weld pool. Two memories for storing settings. Micro Pulse minimizes the heat-affected zone, especially for heavy materials. Adjustable sink and residual gas discharge. ArcPlus II regulator provides improved MMA welding characteristics. Higher weld quality does not require a long machining process. Welding with 1.6-3.2 mm diameter electrodes. The use of a long power cord, more than 100 m is possible thanks to the built-in power factor correction circuit. The IP 23 degree of protection allows the device to be operated also outdoors. Equipment: welding chuck SR-B 17 4 m, ground cable, electrode cable. Model Caddy Tig 1500i, TA34 Welding current 3-150 A Power supply 1 ph, 230 V - 50/60 Hz Idling voltage U 0 72 V MMA welding current (in duty cycle X) 150 A (25%) 120 A (60%) TIG welding current (in duty cycle X) 150 A (25%) 120 A (60%) 110 A (100%) Mains protection 16 A Weight 9,2 kg Degree of protection IP23 Dimensions (DxSxW) 418x188x208 mm Operating temperature from -10°C to +40°C Functions Panel TA34 Method of TIG and MMA with DC current yes Contact and HF ignition yes Adjustment of post gas time yes Digital meter yes (V/A) Synergic line in TIG - Adjustment of thickness of welded mat. - Individual memory yes (2) Pulse and micro-pulse function yes Current ramp-up adjustment yes External control yes