Modern lightweight air plasma metal cutting machine. Modern, lightweight device for cutting metal with air plasma: Small size and weight. PT-80/100 series plasma holders of 6 meters in length. BACK STRIKING plasma arc ignition, which greatly extends the service life of spare parts especially compared with HF high frequency ignition. Easy to use and modern panel. Mesh cutting mode: the plasma arc is maintained even when passing through gaps in the material. Electrogrooving using appropriate parts. Contact cutting (guiding the nozzle directly through the material) or distance cutting. The air pressure regulator is located on the front of the machine. Model FANCUT 71 Power supply: -10% / + 15% 3x400 V / 50-60 Hz Mains protection 16 A Max. current I1 16 A Max. effective current I1eff 12 A Power consumption (X=60%) 11 kVA Cutting current range 20-70 A Cutting current range 20-70 A Idling voltage U0 280 V Cutting current (X=100%) I2 55 A Cutting current (X=60%) I2 70 A Max. thickness of quality cutting of carbon steel 25 mm Recommended thickness of quality cutting of carbon steel 18 mm Split cut 35 mm Working air pressure (for torch length. 6 m) 5.5-6.0 bar Plasma gas Compressed air Maximum air pressure 10 bar Air consumption 160 l/min BACK STRIKING contact arc ignition Infinite current regulation Insulation class F Degree of protection IP 23 Dimensions 360x350x630 mm Weight 25 kg The machine is supplied with a PT-80/PT100 plasma cutting torch 6 m long with a non-contact guide, a mass cable and a starter set of cutting spare parts. Available accessories: Circular PT-80 Compass Z0134AA - 59 25 000102 Circular PT-100 Compass Z0143ZA - 59 25 000104 Bevel Tool 51880 for PT 80 - 59 25 000106 Bevel Tool 51887 for PT 100 - 59 25 000107 Air filter AT-1000 - 59 00 240036 Replacement paper cartridge for AT-1000 - 59 00 240037 Filter adapter AT-1000 (inlet-outlet connectors) - 59 00 240038
No offers available for this product