Inverter plasma cutting machine FANCUT 105 HD MOST

The FANCUT 105 HD is used for quality cutting of metals up to 45 mm thick by air plasma jet. The process is controlled from a modern panel with a liquid crystal display. In addition to adjusting the cutting current, the cutting mode (continuous cutting, mesh cutting or gouging) and the working air pressure can be set. There is also a brightness setting for the display, a choice of pressure unit and information on the current operating status of the machine. The working pressure is regulated by a built-in proportional valve, which minimizes the impact of fluctuations in input pressure. The "fan on demand" function activates the fan only when necessary, which saves electricity and reduces dust contamination of the cutter's interior. In standby mode, the FANCUT 105 HD consumes only 25 watts. Model FANCUT 105 HD Power supply: -10% / + 15% 3x400 V / 50-60 Hz Mains protection 32 (40)* A Max. current I1 36.7 A Max. effective current I1 eff 31.9 (36.7)* Cutting current range 20A/88V - 105A/160V Idling voltage U 0 320 V Cutting current (X=100%) I 2 95 (105) A / 150 V (160)* Cutting current (X=60%) I 2 105 A / 160 V Maximum cutting thickness of carbon steel 50 mm Quality maximum cutting thickness Carbon steel - 45 mm Stainless steel - 40 mm Aluminum - 30 mm Copper - 25 mm Air input pressure 6.0-8.5 bar Max. Air pressure 8.5 bar Air consumption 240 l/min Arc ignition Pneumatic-contact current regulation Stepless Insulation class F Degree of protection IP 23 Dimensions without circular base 377 x 802 x 621 mm Weight 46.7 kg *Values in parentheses refer to 40 A mains protection. Basic values for 32 A protection. The unit is supplied with a 32 A CEE plug. For a cutting current of 105 A in a 100% duty cycle, it is recommended to connect the device to a 40 A protected mains via a 63 A plug. Only an authorized person may replace the plug. Available accessories: SV-105 6.0 m extension cable, SV-125 6 PIN - 59 26 007088 Silicone grease WSF-2 gross 6 g - 59 26 007101 Hand burner SVH-105 angle 15° - 59 26 007038 Hand burner SVH-105 length 80 cm angle 90° - 59 26 007094 Hand burner SVH-.105 length 130 cm angle 90° - 59 26 007095 Hand Burner SVH-105 length 80 cm angle 15° - 59 26 007096 Hand Burner SVH-105 length 130 cm angle 15° - 59 26 007097 Bevel Set. Bevel Tolls PT 40, 60, SCP 60, TH-70,125 - 59 26 005872 Bevel Toll Set SVH-105,125 - 59 26 007175