CASADEI Libra 65/3 RRR 135 wide-belt, three-aggregate grinder

CASADEI Libra 65/3 RRR 135 wide-belt, three-aggregate grinder CASADEI Libra 65/3 RRR 135 wide-belt, three-aggregate grinder High-quality results in the processing of solid wood, veneer or raw material, as well as when sanding varnish Heavy-duty version of the entire machine Operator panel with dustproof membrane keypads on the front of the machine Optimal cooling and long life of sanding belts (belt length 2620 mm) Automatic star-start Motorized table height adjustment Digital working height display Electronically controlled sanding belt oscillation with reduced compressed air requirement Natural rubber lining with negative profile Automatic lining centering Support table with two rollers at the entrance and exit of the lining Rubber rollers, before and after each work unit Flexible steel pressure rail in front of the first unit Carpet feed by a two-speed geared motor Pneumatic belt tension per unit with decimal grain / belt thickness correction capability Operation control on control panel for circuit breaker, thermal switch, operating pressure and brakes Optional RTC / RRTC design with a planer shaft unit instead of the first grinding unit (with 520 indexable inserts with four cutting edges each) RRR execution 1. R unit with diagonally grooved steel shaft ? 140 mm and precise adjustment 2. aggregate R with rubber-coated roller 65 Sh ? 140 mm and fine adjustment 3. aggregate R with rubber-coated roller 45 Sh ? 250 mm and fine adjustment Type RRTC 1. unit R with steel roller grooved diagonally ? 140 mm and fine adjustment 2. unit R with rubber-coated roller 65 Sh ? 140 mm and fine adjustment 3. unit TC with rubber-coated roller 45 Sh ? 140 mm and precise positioning Hard sanding foot (with screwed graphite foot on replaceable insert, precise setting Switching on / off the sanding foot from the control panel with a pneumatic actuator Dimensions and weights Length (product) approx. 1900 mm Width/depth (product) approx. 2580 mm Height (product) approx. 2390 mm Suction connection Suction nozzle diameter 3 x 200 mm Electrical data Feed motor power 0.45/0.8 kW Feed voltage 400 V Drive motor power 11 kW Mains frequency 50 Hz Power of motor for height adjustment 0.25 kW Grinding device Length of grinding belt 2620 mm Width of the grinding belt 1370 mm Grinding width max. 1350 mm Feed unit Feed rate 4.5 / 9 m/min Work Working element height min. 4 mm Working element height max. 170 mm