Workpiece tool measurement Renishaw OTS and Ren probe

OTS Touch probe for tool measurement - including attachment. For wireless use with dual pallet and rotary table machines The OTS is available in two versions, with ½ AA batteries or with AA batteries. This allows the OTS to use the same type of battery as the spindle probe The OTS uses an OSI optical interface with OMM-2 for use with multiple probes, an OMI-2T optical interface for use with two probes, Precise measurement of tool length and diameter Automatic update of tool offsets . OMP40-2 probe with optical signal transmission - Complete with mounting. Ultra-compact - only Ø 40 mm and 50 mm long Miniaturization of electronic components without affecting performance Easy installation - ideal for retrofitting Long battery life, minimal downtime, economical Resistant to shock and vibration Signal Transmission The OMP40- 2 transmits signals 360° at 90° to the spindle axis and with a range of up to 5 m . Modulated signal transmission Modulated optical signal transmission is also safe from interference due to light interference . Probe repeat accuracy. Probe repeat accuracy in one direction is 1..0 μm (measured at 480 mm/min scanning speed and 50 mm stylus) Methods of incorporation The probe can be turned on using the M command or autostart . Methods of switching on The probe can be turned on with the M command or by adjustable shutdown time Probe sealing IPX8 degree of protection, developed for harsh environments in machining centers. Visible LED display - diagnostics. Ultra-compact with optical signal transmission for workpiece setup and inspection. Mounting included OTS Touch probe for tool measurement - including mounting. For wireless use with dual pallet and rotary table machines The OTS is available in two versions, with ½ AA batteries or with AA batteries. This allows the OTS to use the same type of battery as the spindle probe The OTS uses an OSI optical interface with OMM-2 for use with multiple probes, an OMI-2T optical interface for use with two probes, Precise measurement of tool length and diameter Automatic update of tool offsets . OMP40-2 probe with optical signal transmission - Complete with mounting. Ultra-compact - only Ø 40 mm and 50 mm long Miniaturization of electronic components without affecting performance Easy installation - ideal for retrofitting Long battery life, minimal downtime, economical Resistant to shock and vibration Signal Transmission The OMP40- 2 transmits signals 360° at 90° to the spindle axis and with a range of up to 5 m . Modulated signal transmission Modulated optical signal transmission is also safe from interference due to light interference . Probe repeat accuracy. Probe repeat accuracy in one direction is 1..0 μm (measured at 480 mm/min scanning speed and 50 mm stylus) Methods of incorporation The probe can be turned on using the M command or autostart . Methods of switching on The probe can be turned on with the M command or by adjustable shutdown time Probe sealing IPX8 degree of protection, developed for harsh environments in machining centers. Visible LED display - diagnostics.