Hot air soldering station 2-in-1 desoldering machine

WEP 948-III 2-in-1 Soldering station Soldering iron with soldering irons Features: - Very high power flask - Controlled using a PID microcontroller - Rich set of accessories - Function: sleep, auto shutdown, temperature compensation Included: - WEP 948-III soldering station - Soldering iron flask with K917C 6pin tapered tip - Soldering gun with attached 8pin soldering tip - Soldering iron base with cleaning sponge - Power cord - Grounding wire Additional accessories included: - Gun flask / soldering iron arrowhead - Pin - A set of cleaning notches for cleaning arrowheads of different thicknesses - Rubber gaskets - 2 pcs. - Silicone packet - Spare reservoir for the pistol flask - Spare filters: white - 2 pcs, black - 5 pcs, spring - 2 pcs. The WEP 948-III soldering station corrects the set temperature in real time thanks to a precise PID controller, this makes the soldering station have a high temperature stability, even with large fluctuations in heat take-up. Additional features make the work ergonomic and very efficient. Soldering iron built with ESD standards in mind, so you are sure that you will not damage electronic components during service. The turbo pump has a powerful suction element and can easily handle extreme cases. The WEP 948-III 2-in-1 station has user-friendly features: - C/F operation Possibility to set on the display in which units the temperature will be displayed. - Sleep function in order to reduce the flask's heating time to the set temperature, a sleep function was added to the station, the sleep function works independently for the soldering iron and the soldering iron. Thanks to it, after putting the flask on the stand this flask after a predetermined time of 10min will go into sleep mode, and the temperature will drop to 200 degrees. When the flask is picked up again, it will take much less time to heat up to the earlier temperature. Thanks to this, the power consumption decreases, the soldering tip wears out much more slowly. It is possible to disable this function. - Auto shut-off function, the soldering station in order to save energy goes into sleep mode, if it is not awakened from it can automatically turn off. - The mainsail flask has a put down sensor, so we save energy when we do not work with cash - Temperature compensation function there are different arrowheads, some are long and thin others short and thick which leads to different thermal conductivity of these arrowheads and thus different temperatures at their tips. Here the temperature compensation function comes to the rescue, thanks to it we can correct the excess or insufficiency of temperature. Specifications: - Voltage: 220-240 V - Power consumption: 250W - Dimension: 248x150x126 (L x W x H) - Weight: 4kg - Temperature scale: C/F - Sleep function: YES - Buzzer function: YES - Temperature calibration: YES Soldering iron : - Temperature range: 350-480°C - Display: LCD - Heating element voltage: AC 26V ±10% - Temperature stability: ±1°C - Soldering flask: 8 pins - Compressor power: 12W - Vacuum power: 0.5Mpa - Ground resistance at the tip: less than 2 - Flask cable length: ±120cm Grotto soldering iron : - Temperature range: 200-480°C - Temperature stability: ±1°C - Display type: LCD - Resistance to ground: ±2 - System: ESD safe - Soldering flask: 8 pins - Flask cable length: ±110 cm - Voltage on the heating element: 230V WEP 948-III 2-in-1 Soldering station Soldering iron with soldering irons Features: - Very high power flask - Controlled using a PID microcontroller - Rich set of accessories - Function: sleep, auto shutdown, temperature compensation Included: - WEP 948-III soldering station - Soldering iron flask with K917C 6pin tapered tip - Soldering gun with attached 8pin soldering tip - Soldering iron base with cleaning sponge - Power cord - Grounding wire Additional accessories included: - Gun flask / soldering iron arrowhead - Pin - A set of cleaning notches for cleaning arrowheads of different thicknesses - Rubber gaskets - 2 pcs. - Silicone packet - Spare reservoir for the pistol flask - Spare filters: white - 2 pcs, black - 5 pcs, spring - 2 pcs. The WEP 948-III soldering station corrects the set temperature in real time thanks to a precise PID controller, this makes the soldering station have a high temperature stability, even with large fluctuations in heat take-up. Additional features make the work ergonomic and very efficient. Soldering iron built with ESD standards in mind, so you are sure that you will not damage electronic components during service. The turbo pump has a powerful suction element and can easily handle extreme cases. The WEP 948-III 2-in-1 station has user-friendly features: - C/F operation Possibility to set on the display in which units the temperature will be displayed. - Sleep function in order to shorten the time for the flask to heat up to the set temperature, a sleep function was added to the station, the sleep function works independently for the soldering iron and the soldering iron. Thanks to it, after putting the flask on the stand this flask after a predetermined time of 10min will go into sleep mode, and the temperature will drop to 200 degrees. When the flask is picked up again, it will take much less time to heat up to the earlier temperature. Thanks to this, the power consumption decreases, the soldering tip wears out much more slowly. It is possible to disable this function. - Auto shut-off function, the soldering station in order to save energy goes into sleep mode, if it is not awakened from it can automatically turn off. - The mainsail flask has a put down sensor, so we save energy when we do not work with cash - Temperature compensation function there are different arrowheads, some are long and thin others short and thick which leads to different thermal conductivity of these arrowheads and thus different temperatures at their tips. Here the temperature compensation function comes to the rescue, thanks to it we can correct the excess or insufficiency of temperature. Specifications: - Voltage: 220-240 V - Power consumption: 250W - Dimension: 248x150x126 (L x W x H) - Weight: 4kg - Temperature scale: C/F - Sleep function: YES - Buzzer function: YES - Temperature calibration: YES Soldering iron : - Temperature range: 350-480°C - Display: LCD - Heating element voltage: AC 26V ±10% - Temperature stability: ±1°C - Soldering flask: 8 pins - Compressor power: 12W - Vacuum power: 0.5Mpa - Ground resistance at the tip: less than 2 - Flask cable length: ±120cm Grotto soldering iron : - Temperature range: 200-480°C - Temperature stability: ±1°C - Display type: LCD - Resistance to ground: ±2 - System: ESD safe - Soldering flask: 8 pins - Flask cable length: ±110 cm - Voltage on the heating element: 230V